Product Description
The AMS Adjustable short shifter is easy to install and is manufactured to OEM specs and tolerances to allow for smooth and easy operation. The shifter is designed with four adjustable positions that shorten or lengthen the travel distance between shifts and can be adjusted with ease to suit the driver.
 |
Z1 Motorsports 350Z / G35 Urethane Transmission Mount
starstarstarstarstar (69)
$110.49
VQ35DE Timing Cover O-Ring and Seal Kit
starstarstarstarstar (6)
$36
Z1 Lower Shifter Dust Boot
starstarstarstarstar (6)
$29.99
Nismo 350Z / G35 Thermostat
starstarstarstarstar (2)
$148.21
AMS Lightweight Alt. Pulley (VQ35DE)
starstarstarstarstar (1)
$36.23
ATI Super Damper Crank Pulley / Balancer - VQ35DE
starstarstarstarstar (1)
$399.95
Hi I bought this product and I love it. Never really understood how to adjust the height of the shifter. Is there a specific tool you need to do this?
Francisco,
Just grab the black collar that is located above the shifter pivot. Lift this up the shifter and hold it in place. While is held in place you may move the shifter shaft up or down then push the black collar back down into place to lock the shift shaft location.
Z1 Lower Shifter Dust Boot
starstarstarstarstar (6)
$29.99
Z1 Solid Shifter Support Bracket Bushings
starstarstarstarstar_half (15)
$15.99
Z1 350Z / G35 Short Shifter
starstarstarstarstar (11)
$149.99
Z1 300ZX (Z32) Premium Short Throw Shifter
starstarstarstarstar_half (45)
$149.99
Z1 300ZX Oil Impregnated Bronze Shifter Bushings
starstarstarstarstar (32)
$19.20
Z1 370Z / G37 Short Shifter
starstarstarstarstar (5)
$149.99
starstarstar_borderstar_borderstar_border
Nate
May 11, 2023
Adjustability is nice, but the plastic really isn’t strong enough for the application.
starstar_borderstar_borderstar_borderstar_border
Steven
May 20, 2022
Feels sloppy when putting it in gears
starstarstar_borderstar_borderstar_border
Samuel
February 25, 2022
Feels cheaply made and the stopper for reverse is made out of plastic compared to the oem metal prong making it go farther to the right in Neutral than it should and the bushing on the bottom is wider than oem making it difficult to put in and make the collar fit over it to connect it with the transmission I’m not sure if I got a manufacture defect or what happened with it but overall disappointing
starstarstarstarstar
Jose
March 10, 2021
Not particularly necessary but you can instantly feel the difference once installed and once "broken into" after a few pulls and cruising around, this feels crisp, highly recommend. Only thing that concerns me is the fifth gear shifting grind but I did my research and I figured that out, turned out not being this product causing the grinding so worth it if you think you need it.
starstar_borderstar_borderstar_borderstar_border
Kevin
April 26, 2020
Garbage... does not lock shifter moves while driving and goes all the way down when trying to put in reverse
starstarstarstarstar_border
Kyle
December 25, 2015
Product shifts shorter definetly does what it says it will do. Good product for the price. I would like to note two things though that I'm suprised the others did not mention. I installed this myself rather than a shop.
Neither of these problems are z1's they are from ams
Issue one was the 2 large orings were way to big. With them pushed in the grove there was like an extra inch. I had to push it down in there then cut a piece out about a inch of both rings. No big problem but was suprised to see that.
Issue number 2 was the 2 white washers supplied that install at the bottom. It is impossible (atleast working from the inside of the car not under) to get the bottom with the washers to go into the fork. Washers supplied were too large. Even comparing to the stock one it was very noticeable. Had to take some high grit sand paper too both of them and sand a good bit off.
Hopefully this will help someone who had the washer situation like i did. Overall seems like a good product so far shifts are a lot better
starstarstarstarstar
Walter
July 30, 2012
Installed it in my 350z best upgrade yet makes shifting so much more easy to drive thanks Z1
starstarstarstarstar
Edwin
January 26, 2012
Great upgrade! Installs in an hour our less, a novice could do. The shorter positions definitely make it easier and faster going through the gears.
ASRIUBNFAIURNFKAJSNFLAKJSDNFLKASNDFLKASDNMFALKSNDFOANEF