13-piece TwinZ Design Widebody Kit for your Z32. These kits are designed to be bonded or riveted to your factory body panels and used with your TwinZ or '99 JDM Front Fascia and TwinZ Rear Bumper (can be used with the OEM bumper with some trimming).
Fenders are 35mm wider than stock in the front and 60mm wider than stock in the rear for 2 Seater models, and 70mm wider in the rear for 4 Seater models!
13-Piece Kit Includes:
- 2 x 35mm Wide Front Fenders
- 2 x Front Bumper Extensions
- 2 x Side Skirts
- 2 x Door Fillers
- 2 x 60mm Wide Rear Fenders (2 Seater ONLY) or 70mm Wide rear Fenders (4 Seater ONLY)
- 2 x Rear Bumper Extensions
- 1 x Fuel Door Extension
Optional Accessories:
- Front Bumper Extensions - For TwinZ or '99 JDM front Bumpers
- TwinZ Wide Front Lip (ONLY FOR TWINZ FASCIA wider to accommodate the wider front fenders)
- TwinZ Side Lips (contoured to fit widebody side skirts)
Fits:
- ALL 300ZX (Z32) Models (2 seater and 4 seater)
NOTE:
- Please keep in mind that when these fenders are installed, you will need to cut / modify the factory wheel openings substantially to fit the appropriate wheel & tire combination. Please select your Model and Fascia Type from the Available Options menu to ensure you receive the correct kit for your vehicle.
- You'll need to choose between 2 front bumper extensions options, one that fits the '99 JSPEC Front Bumper or one that fits the TwinZ Design P-Spec 1 V2 Front Bumper.
- For other OEM or aftermarket front bumper models, we recommend choosing the P-Spec 1 V2 front extension option, since it's easier to adapt with the modifications needed.
- The rear extensions included on this kit have been specially designed to fit any TwinZ Rear Bumper, but they fit the OEM rear bumper with minimal fabrication as well.
About the Design:
When designing this kit, TwinZ Design used all their experience and knowledge of the original body lines on the 300ZX to make a unique widebody kit that not only makes the car wider, but also incorporates new lines that flow naturally with the car to give it a totally new and exotic appearance. This kit brings the Z32 up to today's supercar standards instead of the typical (almost universal) kits that attach to nearly every car nowadays.
The front fenders extend to 35mm per side while the rear fenders go up 60mm (2 seater) or 70mm (4 seater) per side, respectively (measurements TwinZ consider the best to avoid hard transitions or breaks in the smooth body lines). These additions flow naturally with a very smooth line from the top to the bottom of the arches with the addition of side skirts that were specially made to the meet the new proportions of the fenders, contrary to the typical widebody kits that are only wide at the top section of the arch and have a big break to the stock body.
On the side view, you can see the complex lines TwinZ has incorporated from bumper to bumper with a smooth transition between fenders and side skirts, giving a sense of unity to the whole kit with the added aggressiveness that exhilarates speed from every angle.
As with all TwinZ Design products, the fitment of this kit have been meticulously tested to guarantee the quality and spot-on transitions between the 13 different pieces that come with it.
Be sure to check out other TwinZ Design Products HERE.
 |