- Performance Parts
- Z1 Products
Product Description
These Z1 Silicone Elbow Reducers were designed specifically for use with aftermarket throttle bodies like the Z1 Motorsports Throttle Body and NWP Throttle Body available for VQ35DE equipped vehicles. The larger diameter provides a better fit than your existing silicone without risk damage.
Intended for use with all 3'' intakes, such as the Z1 MSpec STREET and RACE intakes.
Produced in a multi-layer, wire reinforced silicone, these will never deteriorate, crack or degrade over time as a result to their exposure to heat, chemicals or debris (...unlike the factory rubber hoses which will eventually fail!)
Available in your choice of three unique colors (RED, BLACK and BLUE), these Z1 Silicone Elbows are a great complement to your Z or G's engine bay.
 |
check_circle_outlineAdded to cart
Please select and verify all product options for this bundle.
=
Z1 Motorsports 350Z / G35 VQ35DE 75mm Throttle Body Kit
starstarstarstarstar_half (52)
$269.99
Z1 350Z / G35 VQ35DE Plenum Spacer
starstarstarstarstar_half (136)
$199.99
Z1 M-Spec 350Z Cold Air Intake Kit STREET Version - CARB LEGAL
starstarstarstarstar_half (42)
$259.99
OEM VQ35DE Upper Plenum Gasket
starstarstarstarstar (18)
$32.97
NWP Engineering 75mm Throttle Body Kit - 350Z / G35
starstarstarstarstar_half (13)
$324.99
OEM VQ35DE Lower to Middle Plenum Gasket
starstarstarstarstar (19)
$22.86
300ZX (Z32) Balance Tube O-Ring Set
starstarstarstarstar (31)
$9.98
Z1 370Z/G37 Silicone Side PCV Breather Hose set for Aftermarket Intake
starstarstarstarstar_half (66)
$34
Stainless Steel T Bolt Clamps
starstarstarstarstar (2)
$3.48
Z1 350Z / G35 Silicone Crankcase Ventilation hose (Front PCV Crossover
starstarstarstarstar (26)
$21.99
Z1 VQ35DE Plenum Spacer Replacement Bonded Washer
starstarstarstarstar_half (5)
$0.98
Z1 350Z / G35 Replacement Plenum Spacer Hardware Kit
starstarstarstarstar (3)
$29.99
starstarstarstarstar_border
Terry
April 10, 2024
Great project but had to cut the length
starstarstarstarstar_border
Terry
April 7, 2024
Once fitted it went well with the throttle body, I had to trim the length to compensate for the adapter.
starstarstarstarstar_border
Oscar
February 10, 2024
Great fit for my oversized throttle body
starstarstarstarstar
Zachary
August 22, 2023
Great quality just didn’t fit my 03 G5 Sedan so I had to cut it to size.
starstarstarstarstar
Zack
June 30, 2023
Got an upgraded throttle body from 70mm to the hitachi 75 mm throttle body. I ended up needing this and the adapter plate to make it work but great fit no extra work needed just plug and play.
starstarstarstarstar
Sergei
April 6, 2023
Fit as advertised and is awesome to look at in my engine bay. Love all my matching hoses!
starstarstarstarstar_border
Joseph
January 29, 2023
Love the look and it's made really well
starstarstarstarstar
John
July 23, 2022
This is needed for the 75mm throttle body. It starts to bend a bit at the 45° with the Z1 cold air intake (silicon pipe angle should be 50° to prevent this) but it doesn't seem to affect the air-fuel ratio or power at all. I still give it 5 stars as this issue really is superficial.
starstarstarstarstar
Jim
January 14, 2022
Necessary when fitting a big bore TB. Well made, and easy to install.
starstarstarstarstar
Angel
December 20, 2021
Perfect fit on my 75mm Throttle body and looks great!
starstarstarstarstar
JUNIER
August 25, 2021
just love when parts fits just wrigth for the trottle body kit
starstarstarstarstar
TODD
June 13, 2021
It's big and long and makes it a little awkward for your aftermarket pipe to go on it changes things a little bit but good quality
starstarstarstarstar
David
May 10, 2021
Fit my 75mm throttle body snug. Glad I ordered this. The provided boot from my aftermarket intake wouldn't attach to the bigger throttle body. This saved my butt. Thanks Z1.
starstarstarstarstar
Tony
January 28, 2021
Good did the job had to cut to fit but gave me enough left over for the flow meter join
starstarstarstarstar
Joseph
January 26, 2021
DO NOT FORGET THIS IF YOU ARE GETTING A LARGER THROTTLE BODY AND HAVE OR ARE GETTING A CAI. I THOUGHT OF IT AHEAD OF TIME THANKS TO GREAT PRODUCT PLACEMENT IN THE CATALOG ONLINE.
THANKS AGAIN GUYS @ Z1 YOU MADE THIS PAINLESS AND FUN!
starstarstarstarstar
Daniel
January 25, 2021
Nice and sturdy! Works great with my nwp throttle body combined with my Procharger kit. Procharger elbow just wasn’t cutting it anymore.
ASRIUBNFAIURNFKAJSNFLAKJSDNFLKASNDFLKASDNMFALKSNDFOANEF