AEM AIT Intake Air Temperature Sensor

Cooler intake air charge equates to more horsepower. Now you can monitor your intake air temperature using the new AEM AIT Air Temperature Sensor. 

Includes:

• (1) AEM AIT Temperature Sensor
• (1) 3/8 NPT Aluminum Weld On Bung
• (2) Wire Terminals
• (1) Weatherproof Connector

Sensor Specifications:

• Accuracy: < 1.5°C / 2.7°F
• Operating Temp: -40C to 135C / -40F to 275F
• Resistive Range (Ω): See Table
• Thermal Time Constant: < 15 sec. The time required for the sensor to achieve 63.2% of its steady state value when subjected to a step change in ambient temperature [Tc=(Tf-Ti)*63.2%+Ti]. Test medium: silicone oil
• Sensor Body Material: Brass
• Thread: 3/8" NPT
• Hex Size: 3/4"
• Installation Torque: 20Nm / 15 ft-lbs
• Weight: 33.3g
• Electrical Termination: Weatherproof connector. Includes Mating Connector, Pins & Wire Seals

AEM AIT Sensor Product Data

AEM AIT Sensor Install Instructions