JavaScript seems to be disabled in your browser.

You must have JavaScript enabled in your browser to utilize the functionality of this website. Click here for instructions on enabling javascript in your browser.

close
check_circle_outline Added to Cart
Kinetix VQ35DE Velocity Manifold
shopping_cartCart
payment

Checkout

Discover More Products

NWP Engineering 75mm Throttle Body Kit - 350Z / G35
NWP Engineering 75mm Throttle Body Kit - 350Z / G35
$380
Z1 Silicone Elbow for NWP Throttle Bodies
Z1 Silicone Elbow for NWP Throttle Bodies
$28
Z1 Motorsports M-Spec 350Z Cold Air Intake Kit RACE Version
Z1 Motorsports M-Spec 350Z Cold Air Intake Kit RACE Version
$308
Motordyne Iso Thermal Lower Intake Plenum Gasket
Motordyne Iso Thermal Lower Intake Plenum Gasket
$40
OEM 350Z / G35 VQ35DE Spark Plug - One Step Colder - NGK PLFR6A-11
OEM 350Z / G35 VQ35DE Spark Plug - One Step Colder - NGK PLFR6A-11
$7.50
Z1 Motorsports M-Spec 350Z Cold Air Intake Kit STREET Version
Z1 Motorsports M-Spec 350Z Cold Air Intake Kit STREET Version
$298
close

Kinetix VQ35DE Velocity Manifold

starstarstarstarstar_half 4.7/5 - (3 Reviews)
Brand: Kinetix
Fits models: 350Z / G35 / FX35 / FX45

Product Description

Velocity Intake Manifold replaces SSV version with many improvements:
       
        *  Velocity plenum chamber design - Equal air flow between cylinders
        *  12% more plenum chamber volume
        *  10% short intake runners for more flow and higher HP potential
        *  Smoother A/F curve - less tuning required -  more consistent power
        *  High RPM power !!   30.5hp gains at 6800 rpm
        *  Thicker gauge construction for higher boost - warranty up to 30psi

**CLICK  ON THE PICTURE FOR DYNO PROVEN RESULTS**

For 2003-2007 350z and 2003-2007 G35 (single throttle body engine models)

We took the very popular SSV manifold and went over every aspect of its design to make the most impactful improvements.   As our customers and the 350z/g35 marketplace continue to improve the power potential of their engines, the SSV needed a redesign to accomodate the the higher power output of these vehicles.

The new Velocity Manifold is geared for higher flow and higher RPM power gains.  This allows for even larger power gains in the many F/I vehicles out there.  

The new Velocity Plenum design maximizes flow to the furthest cylinders by creating a "venturi" effect.  By gradually narrowing the plenum chamber , the air speed must increase to satisfy the equation of continuity.   Improved flow to all cylinders also means an improved smoother  A/F curve that requires less tuning in F/I applications, and ZERO tuning in N/A vehicles.

This manifold is constructed entirely of Stainless Steel, then polished out for an absolute beautiful finished product that looks as great as it performs.  We chose stainless because of its great thermal properties, conducting 10X!! less heat than aluminum and eliminating much of the manifold's mass, which greatly helps with heat soak.  Stainless is considerably more expensive than aluminum, but the finish shines brighter and longer.  The overall manifold SAVES 10lbs of weight over stock!  Precision TIG welding throughout, and a CNC cut 3/8" main flange.  All mandrel bent runners and charge tube, this manifold rivals the quality of other intakes twice its price.

We improved greatly upon the factory plenum designs.  The factory lower plenum creates MANY dips and turns which do not promote good airflow and create turbulence inside your factory intake.  We developed a straight shot design, eliminating the twists, turns, and obstructions.  We then took each runner and also added velocity stack inlets to each individual runner for even better performance. 

This Manifold is a DIRECT replacement and will work with any aftermarket intake.  It also allows you the ability to use the factory strut bar, or any aftermarket strut bar.  We also have available an engine cover specifically designed for our manifold. 

We recommend an A/F tuning on Forced Induction vehicles (turbo and supercharged)  after installation of the SSV in order to maximize power and overall engine reliability.  Tuning is generally not needed in Naturally Aspirated ( NA ) applications.

Each manifold is supplied with all necessary hardware and instructions.  There is an additional port supplied which can be used for boost gauges, etc.

Optional Poly-Carbonate engine cover also available from Z1. View the cover Here.

View Install Manual Here.

Available Options:

Please review the product description if you are unsure about any of the options below.

Optional Poly-carbonate Cover:

Quantity:

List Price: $953.00
Special Price: $789.00
You Save: $164.00 (17%)
add_shopping_cart Add to Cart
commentLeave a Review question_answerAsk A Question About This Product

Frequently Bought Together

check_circle_outline
Added to cart
Please select and verify all product options for this bundle.
check_circle_outline
Optional Poly-carbonate Cover:
Kinetix VQ35DE Velocity Manifold
Kinetix VQ35DE Velocity Manifold
$789
add
check_circle_outline
You're good. No options for this product.
Motordyne Iso Thermal Lower Intake Plenum Gasket
Motordyne Iso Thermal Lower Intake Plenum Gasket
$40
=
Bundle Price:
$829

Customers who bought this item also purchased ...

NWP Engineering 75mm Throttle Body Kit - 350Z / G35
NWP Engineering 75mm Throttle Body Kit - 350Z / G35
$380
Z1 Silicone Elbow for NWP Throttle Bodies
Z1 Silicone Elbow for NWP Throttle Bodies
$28
Z1 Motorsports M-Spec 350Z Cold Air Intake Kit RACE Version
Z1 Motorsports M-Spec 350Z Cold Air Intake Kit RACE Version
$308
Motordyne Iso Thermal Lower Intake Plenum Gasket
Motordyne Iso Thermal Lower Intake Plenum Gasket
$40
OEM 350Z / G35 VQ35DE Spark Plug - One Step Colder - NGK PLFR6A-11
OEM 350Z / G35 VQ35DE Spark Plug - One Step Colder - NGK PLFR6A-11
$7.50
Z1 Motorsports M-Spec 350Z Cold Air Intake Kit STREET Version
Z1 Motorsports M-Spec 350Z Cold Air Intake Kit STREET Version
$298

Similar to this item

Z1 Motorsports Magnetic Oil Drain Plug
Z1 Motorsports Magnetic Oil Drain Plug
$12
Z1 350Z/G35 VQ35DE Plenum Spacer
Z1 350Z/G35 VQ35DE Plenum Spacer
$188
Z1 Motorsports 370Z / G37 Cold Air Intake Kit
Z1 Motorsports 370Z / G37 Cold Air Intake Kit
$498
Z1 Motorsports 350Z / G35 Urethane Transmission Mount
Z1 Motorsports 350Z / G35 Urethane Transmission Mount
$108
300ZX (Z32) Balance Tube O-Ring Set
300ZX (Z32) Balance Tube O-Ring Set
$9.98
Z1 Motorsports 350Z/G35 Urethane Motor Mounts
Z1 Motorsports 350Z/G35 Urethane Motor Mounts
$208

What our customers say

starstarstarstarstar_border
Michael
December 12, 2017
I like this manifold the only thing is it blocks the transmission dipstick on my auto 03 z.
starstarstarstarstar
Austin
July 28, 2013
Such a great mod. With full exhaust and air intake you can really feel the gain off of this. You can also hear your motor breathing alot better in the mid to high. Instant notice in gain and sounds great. Super easy install and cleans up your engine bay a hell of alot. GET THIS INTAKE MANIFOLD
starstarstarstarstar
Brandon
August 14, 2007
I installed this manifold shortly after I put an intake and the full cat back injen exhaust system which you can purchase from this website...I have a 2004 350Z and this manifold is great....the way it looks and performs is amazing...It definately revs faster and will work great with the twin turbos...Which is what I am purchasing next...A friend of mine has bought this manifold for 2 Z and loves it