- Performance Parts
- Suspension
- Suspension Components
Product Description
The 72265 Rear Kit offers adjustment for the 370Z / G37 / Q60 Coupe. These cams replace the OE camber adjustment cams and provide additional camber (+/- 2.0 degrees) and toe (+/- 2.0 degrees) changes. Adjustment slots will need to be elongated using the 85125 rotary file set or equivalent. This is the perfect kit to adjust rear alignment angles for optimum handling and maximum tire life.
Rear Adjustment range: Camber ±2.00 degree Toe ±2.00 degree
Note: Two kits are required to complete installation if you are using stock arms. (Camber arm and spring perch location)
Only one kit is required if you already have adjustable camber arms other than SPC. (Spring perch location only)
Fits:
- 2009+ Nissan 370Z (Z34)
- 2009-2013 Infiniti G37 (V36/CV36)
- 2014-2015 Infiniti Q60 Coupe (CV36)
Installation Guide
 |
check_circle_outlineAdded to cart
=
Z1 Motorsports 370Z / G37 Adjustable Rear Camber Arms
starstarstarstarstar (18)
$199.99
Z1 Adjustable Front Upper Control Arms 370Z G37 Q50 Q60
starstarstarstarstar_half (12)
$329.99
Z1 Offset Eccentric Bolt Elimination Kit
starstarstarstarstar_half (13)
$39.99
Z1 Motorsports 370Z / G37 Rear Camber / Traction Arm Combo
starstarstarstarstar (8)
$359.98
Z1 370Z / G37 Forged Front Upper Control Arms
starstarstarstarstar (2)
$599.99
OEM 370Z / G37 / Q50 / Q60 VQ37VHR Spark Plug
starstarstarstarstar (34)
$18.75
If I'm currently dropped 1 inch and I know I'll require re alignment. From g37 forums where I'm a member it was recommended I buy rear bolts to get into spec for rear alignment/camber. My question is with this purchase will this allow my camber to be corrected without having to buy camber arms since I'm barley out of spec but can't currently be further adjusted with factory bolts and will I need two of the same kit for toe and camber or is it two different kits? One for camber and different part # for toe?
Ryan,
Without having the car here to confirm it may be difficult to say 100% if you can get away with just the bolts. This may work for you but the rear is a multi-link so making one adjustment may push the other out of range. For this reason we generally go with rear camber arms and the toe bolts to ensure enough range for alignment correction.
350Z / G35 Front Lower Ball Joint
starstarstarstarstar_half (29)
$49.99
Z1 Offset Eccentric Bolt Elimination Kit
starstarstarstarstar_half (13)
$39.99
SPC 350Z / G35 Rear Camber / Toe Alignment Bolts
starstarstarstarstar (7)
$38.45
SPL Q50 / Q60 Eccentric Lockout Kit
$53
SPL Front Outer Tie Rod Ends
starstarstarstarstar (1)
$269
SPL Bumpsteer Adjustable Front Outer Tie Rod Ends
starstarstarstarstar (3)
$404
starstarstarstarstar
Moises
May 6, 2023
I had issues getting my car in alignment specs after lowering with this kit I got it to be on point. Great kit a must if lowering your car
starstarstarstarstar
Alexander
February 6, 2023
have these on my g37s and they work as they should.
starstarstarstarstar
Joan
August 22, 2022
Alaigment issue fixed, with the proper cutting tool is an easy install
starstarstarstarstar
Robert
February 11, 2022
Had to put a new rear subframe in my 2009 g37x coupe, bought all new factory camber/toe bolts since mine broke or stuck in the holes, the alignment shop couldn't get enough adjustment out of the factory ones so I bought the SPC bolts. Should have just done it when I had the subframe out but definitely do able while it's in just use a Dremel with some tungsten carbide bits,it will eat that metal away, bolts work great and was able to get rear alignment
starstarstarstarstar
Andrew
October 20, 2021
They are bolts. They do what they supposed to do. Just know you gotta do a little cutting.
ASRIUBNFAIURNFKAJSNFLAKJSDNFLKASNDFLKASDNMFALKSNDFOANEF