- Performance Parts
- Tools & Supplies
Product Description
The Lisle Wheel Stud Installer easily installs wheel studs in seconds with the use of a ratchet, OR impact wrench. Simply center the tool over the stud, and tighten the lug nut over the top to pull the stud center into the hub.
NOTE: The Lisle stud installer utilizes a two piece assembly with a roller bearing in the center of the two sections to help center the stud in the hub. This bearing is under extreme forces when used and carries NO WARRANTY. It is recommended to use open end lug nuts when installing wheel studs to prevent the stud from bottoming out inside of the lug nut and causing damage to the stud or nut.
![](https://cdn.z1motorsports.com/upload/prop65Modal.jpg) |
check_circle_outlineAdded to cart
=
NISMO Forged Open End Lug Nut Set - M12x1.25
starstarstarstarstar (22)
$90.39
CNC Aluminum Hub Centric Wheel Spacers 2.5, 5, 10, 15, & 20mm
starstarstarstarstar_half (31)
$24.30
Z1 Splined Open End Lug Nut Kit - Chrome
starstarstarstarstar (1)
$35.99
Nissan Titan Extended Wheel Studs
starstarstarstarstar (1)
$36
Nissan Frontier / Pathfinder / Xterra Extended Wheel Studs
starstarstarstarstar (3)
$36
Red Line 75W90 Differential Fluid - 1qt
starstarstarstarstar (23)
$23.53
CNC Aluminum Bolt-On Wheel Spacers (20mm, 25mm, & 30mm)
starstarstarstarstar_half (110)
$88.20
CNC Aluminum Hub Centric Wheel Spacers 2.5, 5, 10, 15, & 20mm
starstarstarstarstar_half (31)
$24.30
Z1 No-Mess Engine Oil Funnel
starstarstarstarstar (45)
$15.99
OEM Rear Wheel Stud
starstarstarstarstar (3)
$2.17
10mm or 20mm Extended Wheel Studs
starstarstarstarstar (15)
$35.99
Z1 Rear Differential Bushing Removal Tool
starstarstarstarstar_half (62)
$139.99
starstarstar_borderstar_borderstar_border
Jager
March 11, 2024
Worked well but fell apart several times still useable but have to be careful
starstarstarstarstar
Daniel
January 16, 2024
This makes the job of replacing your studs a lot less cumbersome and helped me shave some time off the install. You can do it direct to the hub or use the rotor, either way you'll have enough space in either factory or aftermarket lug nuts to get it done.
starstarstarstarstar
Nathaniel
December 15, 2023
This makes installing wheel studs very easy. Highly recommended.
starstarstarstarstar
Chad
July 22, 2023
Worked perfectly! Great item and a must-have if you're doing this yourself. It makes the whole process so much easier.
starstarstarstar_borderstar_border
John
July 1, 2023
It works, but fell apart after 8 studs. Was able to complete the job, by loading it with Grease to stuck together.
starstarstarstarstar
Kaden
June 16, 2023
Having no experience super straight forward and easy to use a recommend an impact gun makes it way easier
starstarstarstarstar
Shannon
May 23, 2023
Have to have tool for any shop or garage! Works great.
starstarstarstarstar
Jason
March 6, 2023
Handy tool, a must have for anyone replacing their wheel studs, especially if they're stripped or damaged.
starstarstarstarstar
Corey
December 4, 2022
Worked perfectly and easy to use.
starstarstarstarstar
Kris
November 30, 2022
bought for installing z1 extended studs on my q60, ended up becoming an often used tool in my toolbox at work
starstarstarstarstar
Christopher
November 14, 2022
Worked perfect, made it so much easier.
starstarstarstarstar
Jozef
July 27, 2022
positive and great product
starstarstarstarstar
Nathaniel
May 9, 2022
Very helpful for installing spacers!
starstarstarstarstar
Raj
May 5, 2022
starstarstarstarstar
Neng
March 23, 2022
Not a super necessary tool since you can sub for a stack of washers, but it's a tool that's hard to break so you'll have it if you or your bum friends need it in the future.
starstarstarstarstar
Jacob
November 22, 2021
Makes stud reinstallation a breeze!
starstarstarstarstar
John
October 13, 2021
I have installed longer studs with the old "stack-o-washers" method and this is the best money you can spend on a specific use tool. I did use a sacrificial lug nut just in case, but there was zero scarring or damage to it. With the tapered seat, you can definitely use your existing (steel) lug nuts for installation. Even if I don't use it again, it was worth every penny just for how easy it made the process.
starstarstarstarstar
Justin
October 12, 2021
starstarstarstarstar
Zhane
September 20, 2021
starstarstarstarstar
Chadrick
August 11, 2021
starstarstarstarstar
Eric
July 13, 2021
Makes putting extended studs in easy
starstarstarstarstar
Philip
May 12, 2021
Worked as designed. Installed all 20 extended studs on my G37X.
The only issue is I didn't have a nut to use to pull the studs through. I only had the stock nuts which are closed and not deep enough. Had to add some washers under the tool. It would be nice if Z1 included one open lug nut to do the job.
starstarstarstarstar
James
April 6, 2021
This stud installer worked as expected. Handy tool.
starstarstarstarstar
Michael
February 9, 2021
Works perfectly and makes installing the studs so easy.
starstarstarstarstar
Mike
January 25, 2021
Great tool. Perfect for tightening up wheel studs.
starstarstarstarstar
Darian
January 25, 2021
This thing makes your life so easy, used an air impact and this to install my extended lugs, levels it all out perfect and eliminates any worry you might have of improper install on studs
ASRIUBNFAIURNFKAJSNFLAKJSDNFLKASNDFLKASDNMFALKSNDFOANEF