- Performance Parts
- Z1 Products
Product Description
Old style PTUs are known for going bad; causing all sorts of poor running conditions or even shutting down completely, these problems were so bad in fact that Nissan had a campaign to update them to the Version 2 style with an updated PTU and patch harness.
While this was nice and a really quick procedure (for warranty tech pay on their part), there was still an issue with these parts. The old style connectors on the original harness aren't sealed so really bad corrosion at this point in the ignition circuit is really common and often causes the same running issues, or worse not running at all. Sometimes the connections can simply be cleaned from the connector, but often problems will persist because the corrosion has worked its way into the harness.
The good news is that the connection on the new style PTU is sealed, if the harness doesn't have corrosion in the wires eliminating the old style connection on the patch harness is the common way to rid yourself of these pesky problem. Often though the harness has corrosion in it and the labor investment isn't worth the fight for a fix that may still cause problems in the future.
Now you can get a high quality solution with or without wires to repair this problem or to custom build your own harness, and for well under half the cost of the OEM plug and play harness that isn't sealed.
If you are looking for the best spark and performance out of your Z, eliminating corrosion anywhere in the ignition circuit should be one of your top priorities.
Each complete harness kit includes heat shrink tubing.
Fits:
- 1990-1996 Nissan 300ZX (Z32)
Please choose the appropriate options below.
|
check_circle_outlineAdded to cart
Please select and verify all product options for this bundle.
=
300ZX (Z32) Early Style Crank Angle Sensor (CAS) Repair Harness
starstarstarstarstar (3)
$12
300ZX (Z32) / 240SX (S13) Fuel Injector Plug (Early Style Connector)
starstarstarstarstar_half (8)
$7.99
Z1 300ZX Ignition Coil Pack Repair Harness
starstarstarstarstar_half (6)
$6.98
300ZX (Z32) Coolant Temperature Sensor / AAC Valve Repair Harness
starstarstarstarstar (6)
$9.98
300ZX (Z32) Throttle Position Sensor (TPS) Repair Harness
starstarstarstarstar (3)
$10
300ZX Mass Air Flow (MAF) / Early Small PTU Repair Harness
starstarstarstarstar (1)
$15
350Z / G35 VQ35DE Knock Sensor Sub Harness
starstarstarstarstar (37)
$29.99
Z1 300ZX (Z32) Door Lock Actuator Replacement
starstarstarstarstar (10)
$23.99
Z1 300ZX Ignition Coil Pack Repair Harness
starstarstarstarstar_half (6)
$6.98
Z1 OEM Replacement 300ZX Battery Harness / Starter Cable
starstarstarstarstar_half (10)
$74.98
300ZX (Z32) / 240SX (S13) Fuel Injector Plug (Early Style Connector)
starstarstarstarstar_half (8)
$7.99
Z1 Motorsports 370Z JDM Reverse Fog Light Installation Harness
starstarstarstarstar_half (14)
$15
starstarstarstarstar
Scott
January 7, 2024
This also fits the igniter for a Subaru SVX
starstarstarstarstar
Robert
October 17, 2021
Z1 motorsports sells quality products
ASRIUBNFAIURNFKAJSNFLAKJSDNFLKASNDFLKASDNMFALKSNDFOANEF