EFI Wiring Harness ('95 TT Manual), Performance OEM and Aftermarket Engineered Parts Global Leader In 300ZX 350Z 370Z G35 G37 Q50 Q60 - Z1 Motorsports
place
expand_more
close
check_circle_outline Added to Cart
EFI Wiring Harness ('95 TT Manual)
shopping_cartCart
payment

Checkout

Discover More Products

Z1 One (Single) Piece Stainless Steel Clutch Line
Z1 One (Single) Piece Stainless Steel Clutch Line
$49
Z1 300ZX TT 2.5
Z1 300ZX TT 2.5" Intercooler Piping Kit
$484
300ZX (Z32) Manifold to Turbine Housing Nut Locking Plate
300ZX (Z32) Manifold to Turbine Housing Nut Locking Plate
$12.17
OEM 300ZX (Z32) Exhaust Manifold Gasket
OEM 300ZX (Z32) Exhaust Manifold Gasket
$14.88
OEM 300ZX (Z32) '90-'93 TT High Pressure Power Steering Hose
OEM 300ZX (Z32) '90-'93 TT High Pressure Power Steering Hose
$374
OEM 300ZX (Z32) Manifold to Turbine Housing Stud
OEM 300ZX (Z32) Manifold to Turbine Housing Stud
$12.13
close

EFI Wiring Harness ('95 TT Manual)

Brand: Nissan
Part #: 24011-51P61
Fits models: 300ZX

Product Description

Due to the age of our cars and high heat conditions under the hood, the original connectors on the engine wiring harness tend to break to pieces and cause all sorts of issues including hesitation, running on less than 6 cylinders, and even stalling. We usually suggest taking the opportunity to change this harness if the engine is out of the car on any Z32 with over 100,000 miles.

This EFI Harness, although built for the '95 Twin Turbo Model, can also be used for any Twin Turbo model with upgraded (new style) injectors (equipped with a Manual Transmission) by changing only a few of the harness plugs. For the '94 model Twin Turbos with upgraded (new style) injectors this is a plug and play harness. For '90 - '93 Twin Turbo Models with upgraded (new style) injectors the connectors that need to be changed go to the AC Compressor Clutch and Crank Angle Sensor.

The '95 Twin Turbo models are equipped with a Boost Pressure Sensor that is not included on any of the earlier models. If you are using this harness on an earlier model you will have one 3 pin connector near the Mass Air Flow Meter that is not used.  

Often the 20+ Year old Alternator to Transmission harness is brittle and corroded causing inoperative or inacurate readings for transmission sensors.  
This harness also supports the alternator and starter signal circuits, problems with this harness can leave you stranded.
Easily replace it while replacing your EFI harness!
Z1 now offers a replacement harness for much less than the Nissan counterpart, add it as an option with the transmission and save even more!

Even more important than the Alternator to transmission harness is replacing the Knock sensor subharness when you have the opportunity.  This harness is exposed to the worst heat cycling and condensation in the engine bay and often suffers the most, often leading to poor running conditions or inaccurate knock readings.  Choose below to add a new Z1 Upgraded knock sensor harness and/or knock sensor with your EFI harness for a discounted price and it ships for free with your EFI harness. 

 

Available Options:

Please review the product description if you are unsure about any of the options below.

Z1 Alt to Trans Harness:

Knock Detection:

Quantity:

Price: $688.00
add_shopping_cart Add to Cart
commentLeave a Review question_answerAsk A Question About This Product

Customers who bought this item also purchased ...

Z1 One (Single) Piece Stainless Steel Clutch Line
Z1 One (Single) Piece Stainless Steel Clutch Line
$49
Z1 300ZX TT 2.5
Z1 300ZX TT 2.5" Intercooler Piping Kit
$484
300ZX (Z32) Manifold to Turbine Housing Nut Locking Plate
300ZX (Z32) Manifold to Turbine Housing Nut Locking Plate
$12.17
OEM 300ZX (Z32) Exhaust Manifold Gasket
OEM 300ZX (Z32) Exhaust Manifold Gasket
$14.88
OEM 300ZX (Z32) '90-'93 TT High Pressure Power Steering Hose
OEM 300ZX (Z32) '90-'93 TT High Pressure Power Steering Hose
$374
OEM 300ZX (Z32) Manifold to Turbine Housing Stud
OEM 300ZX (Z32) Manifold to Turbine Housing Stud
$12.13

Questions our customers have asked

I have a couple of questions concerning part number 24011-51P61 (engine harness). Will this fit a 1995 300ZX USDM NA with factory manual transmission ? If so, I assume there might be some plugs that are not used ? Thanks, Joe Chen
Yes, it will work but there will be a few plugs that are not used.

Similar to this item

OEM VQ35DE Rev-Up Oil Temperature Sensor Sub Harness
OEM VQ35DE Rev-Up Oil Temperature Sensor Sub Harness
$132.68
300ZX OEM EFI Wiring Harness ('91 TT Manual)
300ZX OEM EFI Wiring Harness ('91 TT Manual)
$698
OEM 300ZX (Z32) Detonation (Knock) Sensor Sub-Harness
OEM 300ZX (Z32) Detonation (Knock) Sensor Sub-Harness
$69.35
OEM 300ZX (Z32) Alternator to Transmission Harness (Manual)
OEM 300ZX (Z32) Alternator to Transmission Harness (Manual)
$365.07
300ZX EFI Wiring Harness ('90 NA Manual)
300ZX EFI Wiring Harness ('90 NA Manual)
$598
300ZX EFI Wiring Harness ('91 NA Manual)
300ZX EFI Wiring Harness ('91 NA Manual)
$598