This winning combination results in the best all around turbo kit for Z32s over 500 whp, at a great price! Will produce 28psi and can make 600+ whp on race fuel with proper tuning and appropriate modifications. These turbos feature all new components; high output compressor, high-efficiency GT series turbine and compressor wheels. Comes with flange adapters and couplers for a bolt-on setup to stock pipes. 5 bolt downpipes are required and available as an option below.
With the addition of camshafts, intercoolers, portwork, upgraded manifolds, and proper tuning abilities, these turbos are capable of producing up to 700 whp. We've always been impressed with the performance of the HKS 2530s now you can purchase almost identical turbos built by the same manufacturer (Garrett) for over a thousand dollars less!
- 1990-1996 Nissan 300ZX (Z32)
Updates and improvements to the GT675RS kit include :
- Aluminum compressor inlet flanges to mate to your stock diameter or 2.5" inlet pipes (Choose your option below)
- O-ringed compressor inlet flanges with included high quality Viton O-rings for a perfect air tight seal.
- Redesigned silicone couplers with just the right bends for a perfect fit between the compressor outlets and stock pipes.
- Even more new hardware now included like 10 new copper crush washers, 10 new turbine housing to downpipe bolts, and Z1 reinforced coolant & wastegate hoses.
- Forget slotted oil drain lines, spacers, and leaks. All Z1 GTBB turbo kits now include the Z1 Silicone Turbo Oil Return Line Kit.
Compressor map for the GT675RS
- 2 New Garrett GT BB Turbochargers
- 2 New High Pressure Adjustable Wastegate Actuators with Brackets (Installed)
- 2 Braided Stainless Steel Oil Feed Lines with .035" Restrictors & Fittings
- 2 Compressor Housing Inlet Adapter Flanges with O-Ringed Seals (Welded to the Compressor Housing)
- 2 Compressor Housing Outlet Couplers (5 Ply Reinforced Silicone)
- 4 T-Bolt Clamps for Compressor Outlet Couplers (225mm)
- 2 Exhaust Manifold to Turbine Housing Gaskets (4 Bolt)
- 2 Turbine Housing to Downpipe Gaskets (5 Bolt)
- 10 Turbine Housing to Downpipe Stainless Steel Bolts
- 10 Copper Crush Washers for Coolant and Oil Lines
- 2 Oil Return Hose Flanges with O-Ringed Seals (Installed)
- 4 Allen Head Fasteners for Oil Return Flanges (Installed)
- 2 Formed Fluoro-Silicone Oil Return Hoses
- 6 Feet of 6.5mm (1/4") Z1 Reinforced Silicone Wastegate Actuator Hose
- 2 Feet of 8mm (5/16") Z1 Reinforced Silicone Coolant Hose
Before installing please read the Oil Feed Line Installation Manual.
NOTE: 5-Bolt Downpipes required and available as an option below.