- Performance Parts
- Z1 Products
Product Description
This is for one Z1 Motorsports air intake for a Z32 (1990+ 300zx). Featuring a high flow serviceable cone filter, cast adapter including velocity stack, easy installation. A great choice for all Z32 models NA & TT. This intake is the same size as the "pop charger", bolts directly to the Z32 Mass Air Flow sensor, and can also be used on "dual pop" or "Doolz" dual intake configurations.
Getting air into the engine is key to producing power. The stock air box system uses paper filter elements and the path of air through the box offers resistance which means less air gets into the engine. Upgrading your filtration system to a high-flow filter that also features a velocity stack will enhance your engine's breathing capability.
A velocity stack is a radiused port which funnels the air into the mass airflow unit - this guides the turbulent gases as they pass through the filter element and enhances flow characteristics. The K&N style filter is one of the best filters available. It offers superior airflow over the rest and it is cleanable using the K&N filter cleaning kit available below.
*Please Note the filter recharge kit cannot ship Express or international. It will only be available via FedEx Ground Shipping*
*** This item does not qualify for any additional discounts or promotions *** |
 |
check_circle_outlineAdded to cart
Please select and verify all product options for this bundle.
=
OEM 300ZX (Z32) Oil Filter
starstarstarstarstar (8)
$6.25
300ZX (Z32) Balance Tube O-Ring Set
starstarstarstarstar (31)
$9.98
Z1 300ZX Motorsports NA Intake Hardpipe Kit
starstarstarstarstar_half (7)
$99.99
OEM 300ZX (Z32) Fuel Filter
starstarstarstarstar (11)
$20.32
Z1 PTU Relocation Kit
starstarstarstarstar (5)
$19.99
OEM 300ZX (Z32) Idle Air Gasket (IAA / IAC)
starstarstarstarstar_half (9)
$6.36
Does the filter in this kit come pre-oiled and ready for use?
Z1 370Z / G37 Cold Air Intake Kit - CARB LEGAL
starstarstarstarstar_half (184)
$399.99
Z1 350Z / G35 VQ35DE Plenum Spacer
starstarstarstarstar_half (136)
$199.99
Z1 Q50 / Q60 3.0t Drop-In Air Filters
starstarstarstarstar_half (31)
$59.99
Z1 Silicone Post-MAF Intake Hoses
starstarstarstarstar_half (65)
$119.99
Z1 350Z / G35 High Flow Intake Kit - CARB LEGAL
starstarstarstarstar_half (40)
$149.99
Z1 Q50 / Q60 3.0t Cold Air Intake System
starstarstarstarstar_half (30)
$399.99
starstarstarstarstar
Stephen
April 9, 2024
Installed easily and look great!
starstarstarstarstar
Leo
July 25, 2023
Fits good and unlike the knn filter adapter there is no nuts to fall out in your intake that could possibly go inside your motor, threaded. Sounds great too!
starstarstarstarstar
Wallace
June 17, 2023
Simple to install. Replaced old filter damaged by paint overspray.
starstarstarstarstar_border
Jonathan
August 1, 2022
Fits and works great. Much better for maintenance and access than the stock box. Only deducting a star because my cone metal came with cosmetic scratch damage on it.
starstarstarstarstar
Evan
June 28, 2022
1990 NA 300zx.
Fantastic purchase and definitely reduced a good amount of intake flow restriction, especially combined with Z1's silicone intake hoses. Install was easy and it fit perfectly with the old splash guard, gently resting against it on the bottom. You can zip-tie/safety-wire it up if you think it will flop around, but mine was in good condition and seemed pretty stiff. The removal of the old airbox was the most difficult part. I suggest finding a nice thin ratcheting wrench to take the two bolts out under the front of the bumper mount. Otherwise you can do it like I did and unscrew them 30 degrees at a time! XD
starstarstarstarstar
Daniel
June 5, 2022
Well made product and fast shipping.
starstarstarstarstar
Cem
March 17, 2022
I needed an extra,so had to buy,good material
starstarstarstarstar
Ron
January 26, 2022
starstarstarstarstar
Arthur
January 9, 2022
Right On! Great product! Thanks Z1!
starstarstarstarstar
TJ
August 25, 2021
Exactly what I needed! Thanks Z1!
starstarstarstarstar
Dallas
July 26, 2021
Much easier to install than removing the stock air box. So excited for my Z to breathe!
starstarstarstarstar
Jack
July 16, 2021
great product and it fit perfectly
starstarstarstarstar_border
James
May 25, 2021
Would have been better with the netting bag but an awesome purchase at that 💯
starstarstarstarstar
Cameron
May 19, 2021
Perfect fit. Great quality.
starstarstarstarstar
Alexander
December 15, 2012
I love this filter setup. very high quality and a little more power for a very good price.
starstarstarstarstar
Ethan
May 8, 2011
Purchased one for my NA a few years back, and about to get another for my TT. They are GREAT filters, and for this price it's pointless to buy the STILLEN filters or other brands in my opinion.
starstarstarstarstar
Adam
February 9, 2010
Great intake. Hardest part of the install is tearing out the stock airbox. Makes things much cleaner, better intake sound, and perfect fitment. Good job Z1.
starstarstarstarstar
Shae
December 31, 2008
Great product!! Will be buying from you guys more often.
starstarstarstarstar
Michael
March 1, 2008
This is a must have addition to your Z. Very easy to install and makes a very noticeable difference in performance.
ASRIUBNFAIURNFKAJSNFLAKJSDNFLKASNDFLKASDNMFALKSNDFOANEF