Z1 Motorsports Adjustable Tension Rods for '90+ Nissan 300ZX models add positive caster adjustability to help improve alignment for handling or to get your Z back to OE specs after lowering or damage to the forward suspension mounting points.
With over a year in development and testing, Z1 Motorsports is now proud to offer a fully adjustable and customizable Tension Rod solution for the Z32 chassis. Thorough examination of the factory suspension as a system and on a component basis led to our approach. After testing the many options available on the market, finding common shortcomings, "issues" and failure points, we decided that a no compromise approach was the solution. We set forth an extensive list of design goals and product requirements; we believe it has led us to nothing short of the best part available for this application.
Inspected, assembled, re-inspected, and packaged in house by Z1's trained staff, the adjustable tension rods arrive ready to install on your Z right out of the box. A professional alignment is strongly recommended after the installation of the arms.
Standard Tension Rod Components:
- Body - Machined from solid, billet 6061 Aluminum and hard anodized black; the fluid design is not only aesthetically pleasing, its form is completely functional. Clearance will not be any issue through the full range of suspension travel. Why aluminum? Weight was at the top of our list for requirements, to add adjustment to the factory arm and even match the weight without being heavier was a steep challenge.
- Adjuster - Machined from Stainless Steel, the adjuster is a critical part of the arm for both safety as well as adjustability. Careful consideration was taken to ensure maximum adjustability without compromising safety or increasing the arms' overall weight unnecessarily. Stainless was used for long life while offering a great strength in a compact size. We even had your alignment tech in mind when designing these parts, featuring a double adjuster alignment changes are quick and easy with a turn of this jewel. Even selecting the size of the part features like the adjuster hex and the jam nut size was important; it can be tight working in this area of multi-link suspension so keeping lock nuts a reasonable size and centralized was important to us. Even if you don't have a 27mm and 30mm wrench to tighten these up, you should be able to succeed with a reasonably sized crescent wrench.
- Jam Nuts - Not readily available before production in our desired size, custom LH and RH thread jam nuts were spec'd. Like the rest of these components, not only were their outer dimensions spec'd, even the thread class was specified. To continue with the corrosion resistance these fasteners are also produced in Stainless Steel.
Features / Benefits:
- CNC Machined from 6061-T6 Billet Aluminum
- Black Hard Anodized Finish
- Stainless Steel Adjuster & Jam Nuts
- Utilizes OEM Size Bushings (Energy Suspension Bushings Installed)
- Up to 38mm of positive camber adjustment
- Offset mount provides strength while retaining OEM Geometry
- Lighter than OEM Tension Rods
Optional Race Upgrade
Much like our Front Upper Control Arms, we also sell a 'Race' version of our tension rods. These feature a solid heim joint design with included spacers. These remove all possibility for bushing flex, maximizing performance and providing the most direct and uncompromising driver feel. Because of the added stiffness, drivers will notice much higher vibrations and noise. Customers not comfortable with or concerned about the increase in harshness or noise should purchase the STREET Version.
To view a full color copy of the Installation Manual for the STREET Version of Z1 Motorsports Adjustable Tension Rods, please download the PDF document HERE.
To view a full color copy of the Installation Manual for the RACE Version of Z1 Motorsports Adjustable Tension Rods, please download the PDF document HERE.
Please Note:
The use of thread locker is recommended under the jam nuts once final alignment adjustments have been made.
For those of you with the factory air guides that attach to the tension rods and lower control arms, choose the option below to include hardware to allow you to add these to the Z1 Tension Rods.
 |