Z1 Motorsports 370Z / G37 Cold Air Intake Kit, Performance OEM and Aftermarket Engineered Parts Global Leader In 300ZX 350Z 370Z G35 G37 Q50 Q60 - Z1 Motorsports
place
expand_more
close
check_circle_outline Added to Cart
Z1 Motorsports 370Z / G37 Cold Air Intake Kit
shopping_cartCart
payment

Checkout

Discover More Products

370Z / G37 / Q50 / Q60 SS Test Pipes
370Z / G37 / Q50 / Q60 SS Test Pipes
$279
Z1 Motorsports 370Z/G37 Oil Cooler Kit
Z1 Motorsports 370Z/G37 Oil Cooler Kit
$398
Motordyne Advanced Resonance Tuning (ART) Test Pipes
Motordyne Advanced Resonance Tuning (ART) Test Pipes
$618
Z1 Motorsports Rear Differential Bushing Removal Tool
Z1 Motorsports Rear Differential Bushing Removal Tool
$128
Z1 Motorsports Stainless Steel Y-Pipe - 350Z/370Z/G35/G37/Q60
Z1 Motorsports Stainless Steel Y-Pipe - 350Z/370Z/G35/G37/Q60
$288
OEM R35 GT-R Red Start Button
OEM R35 GT-R Red Start Button
$39.77
close

Z1 Motorsports 370Z / G37 Cold Air Intake Kit

starstarstarstarstar_half 4.9/5 - (14 Reviews)
Fits models: 370Z / G37 / Q60 2014-2016

Product Description

The Z1 Motorsports VQ37VHR Cold Air Intake for dual throttle body cars provides improved flow and a cooler denser air charge resulting in greater combustion efficiency and more power.  Significant gains in power and response have been proven with this torture tested intake.  

Features

Constructed of a mandrel bent 6061 aluminum tubing, TIG welded, polished, and features an integrated MAF housing for greater airflow, weight reduction, streamlined aesthetics, and overall product performance. This kit was designed to allow customers to install this intake without the need for immediate tuning, although a dyno tune is recommended to get the most out of your VQ. The improved density and flow rates help invigorate the output and even sound of your VQ37VHR engine with a deeper growl in low RPMs and aggressive tone in higher RPMs.

Cold-Air InnovationZ1 Velocity Stack

The new intake uses race proven technology by including two specially designed large media air filters with integrated velocity stacks for increased air flow. A velocity stack is designed to maximize and optimize air flow by allowing air to gently enter the intake piping through an un-obstructed rounded taper (similar to a trumpet horn.) This results in less intake turbulence and increased air velocity, allowing your intake system to work at it's maximum potential!  

Aesthetically Pleasing

While the primary focus in aftermarket intakes may be enhanced performance, our focus was to provide a product that performed tremendously while providing a show quality finish and appearance. Available in two finishes, black and polished aluminum with your choice in Red, Black, or Blue Silicone Couplers. The intake also features MAF bosses that have been relocated to the bottom side of the intake piping for a stealth like appearance.

Performance

While every cars result may differ depending on mods and tune, Z1 Motorsports was able to achieve an increased 16whp and and additional 12lb-ft of torque in house on a car previously equipped with just a Full Tomei Expreme Exhaust. No re-tune was performed to achieve these results! You can expect even greater results when re-tune is performed.

Upgraded Velocity Stacks

Z1 also offers an oversized velocity stack upgrade helping push the potential of these intakes EVEN FURTHER! This upgrade can be purchased HERE and adds larger filters and velocity stacks which allow for better airflow producing even more power gains than the intakes alone. This upgrade has produced 5+ RWHP consistently on several Z's with dyno tune. As you can see from the dyno graph below, this upgrade produces more horsepower and torque across the entire RPM range.

Intake Kit Includes;

  • (2) Aluminum Intake Hard Pipes
  • (2) Silicone Straight Reducer Hose
  • (2) Silicone Throttle Body to Hard Pipe Adapter
  • (2) Aluminum 90° Hose to Filter Adapter
  • (2) Z1 High Flow Velocity Stack Air Filters
  • (1) Z1 Silicone Side PCV Breather Hose Set 
  • (10) Intake Coupler Clamps
  • (1) Installation Instructions

***CUSTOM POWDER COATING ARE NOW AVAILABLE***

You may now chose to add your choice of any powder coated colors to your Z1 Intakes in the options below! Custom colors available upon request. Please contact our sales department to check costs and lead times.

Mix and match couplers and powder coating to fully customize your intake system to match your ride.

Available in:

  • Wrinkle Red
  • Wrinkle Black

Please note: Since this is a custom option, some powder coating services may add delay on shipping your order. We do however, strive keep the most popular colors in stock. 

Additional Dyno Tuning and Installation Services are available! Please call us for pricing and quotes!!

Available Options:

Please review the product description if you are unsure about any of the options below.

Finish:

Coupler Color:
Year / Model:

Quantity:

List Price: $528.00
Special Price: $498.00
You Save: $30.00 (6%)
add_shopping_cart Add to Cart
commentLeave a Review question_answerAsk A Question About This Product

Frequently Bought Together

check_circle_outline
Added to cart
Please select and verify all product options for this bundle.
check_circle_outline
Finish:Coupler Color:Year / Model:
Z1 Motorsports 370Z / G37 Cold Air Intake Kit
Z1 Motorsports 370Z / G37 Cold Air Intake Kit
$498
add
check_circle_outline
Include:
370Z / G37 / Q50 / Q60 SS Test Pipes
370Z / G37 / Q50 / Q60 SS Test Pipes
$279
=
Bundle Price:
$777

Customers who bought this item also purchased ...

370Z / G37 / Q50 / Q60 SS Test Pipes
370Z / G37 / Q50 / Q60 SS Test Pipes
$279
Z1 Motorsports 370Z/G37 Oil Cooler Kit
Z1 Motorsports 370Z/G37 Oil Cooler Kit
$398
Motordyne Advanced Resonance Tuning (ART) Test Pipes
Motordyne Advanced Resonance Tuning (ART) Test Pipes
$618
Z1 Motorsports Rear Differential Bushing Removal Tool
Z1 Motorsports Rear Differential Bushing Removal Tool
$128
Z1 Motorsports Stainless Steel Y-Pipe - 350Z/370Z/G35/G37/Q60
Z1 Motorsports Stainless Steel Y-Pipe - 350Z/370Z/G35/G37/Q60
$288
OEM R35 GT-R Red Start Button
OEM R35 GT-R Red Start Button
$39.77

Questions our customers have asked

Does this intake require cutting the radiator support?
It does not require any cutting of the radiator support unlike most of the other intakes on the market.
Hi, Will this kit work with RHD vehicles?
Yes this will work on RHD vehicles.
Does this air intake fit my 07 vq35hr g35 sedan??
Sure will Daniel! You'll want to follow the link below to the listing that has your G35 HR Sedan optioned in the bottom. Thanks! (Link)
Is this intake CARB approved, for California smog test?
Sorry Kyle, Z1 intakes have not undergone CARB testing for California smog. Regards, Z1 Team
Sorry newb question, Does the front bumper cover have to be removed each time the filters need cleaning?
Bryan, Yes, in order to access the filters you'll need to remove the front fascia. Fortunately Nissan made it rather easy to do on these cars. Regards, Z1 Team
Will I need to get my Z tuned after installing your cold air intake?
Alex, Good question! We designed the Z1 cold air intakes so that tuning is not required after installation. They work great with the stock tune and still produce good gains in HP and TQ. Regards, Z1 Team
Will this fit a g37 sedan
Yes this will fit G37 Sedan.

Similar to this item

Z1 350Z/G35 VQ35DE Plenum Spacer
Z1 350Z/G35 VQ35DE Plenum Spacer
$198
300ZX (Z32) Balance Tube O-Ring Set
300ZX (Z32) Balance Tube O-Ring Set
$9.98
Z1 350Z / G35 High Flow Intake Package
Z1 350Z / G35 High Flow Intake Package
$168
Z1 Silicone Post-MAF Intake Hoses
Z1 Silicone Post-MAF Intake Hoses
$108
Z1 370Z/G37 Silicone Side PCV Breather Hose set for Aftermarket Intake
Z1 370Z/G37 Silicone Side PCV Breather Hose set for Aftermarket Intake
$28
Z1 Motorsports Boost Leak Tester
Z1 Motorsports Boost Leak Tester
$18

What our customers say

See all reviews
starstarstarstarstar
Dustyn
April 20, 2019
Purchased these March 8th of last month. Took a little bit of time for me to install due to lack of experience but it wasn't too bad. Once you get the bolts off it's no issue from there. As far as power gains it was noticeable from the start. As far as sound you will not hear much of anything after you drive for a little while. I just got my car tuned with the custom UpRev ARC license and put down 342 to the wheels with just this intake, z1 test pipes, and full Armytrix exhaust. Around 405-410 at the crank if I had to guess. To wrap up this review I now hear the intake much more after the tune and it sounds fantastic!
starstarstarstarstar
Gordy
December 2, 2018
Installed the Z1 Cold Air Intake this weekend with Z1 High Flow Race Intake Kit and the Dewla Dezign 370z Air Guide WOW what a difference in power. I removed the front crash bar to install the Dewla Air Guide
starstarstarstarstar
Marc
November 26, 2018
I got these on the Black Friday sale and the set is fantastic. Easy install and really cleans up the engine bay. I was hoping I would be able to hear the induction noise more but sadly the aftermarkets exhaust and lack of catalytic converters means the noise from the back drowns out everything else. Still a great purchase. The butt dyno says it is much more responsive and pulls harder in the upper RPM range. To get the full benefit though a tune is definitely recommended. My only complaint isn't with the intake kit itself, it's that Z1 needs to check the ink in their printer, the instructions were basically un-readable. Not a big deal because the instructions are on the product page, but that meant I had to keep unlocking my phone during the install, again not a big deal at all.
starstarstarstarstar
John
November 23, 2018
Absolutely amazing! Parts are unbelievable high quality and are a perfect fit. Super easy install even with limited skills. Don’t be afraid of pulling the bumper! It’s not bad and only took 10 minutes to do. The looks alone are worth the price. Very noticeable HP increase. I’ll have to keep the traction control on now!!
starstarstarstarstar
Phillip
November 6, 2018
Great intake, like someone else said no front bumper pull needed for the g37 coupe. Has held up fine in the rain, and the intakes are solid and don’t move around since they are held up through the factory airbox intake outlet. Much improved throttle repsonse and sound along with some power gains.
starstarstarstarstar
Joey
July 8, 2018
Amazing intake, took only an hour to install looks, sounds, and drives amazing!
starstarstarstarstar_border
Jacob
August 29, 2017
Awesome Intakes! Easy To Install. I would have liked the piping to be a little bigger as well as the intake filters. I would Definitely recommend these.
starstarstarstarstar
Justin
July 10, 2017
Intake was a great fit. Install took about 40 min with basic tools. The instructions were for a 370z, although I have a G37 Sedan. But nonetheless it was easy to follow.
starstarstarstarstar
Peyton
May 23, 2017
Great product took me about a hour to install and I'm impressed ordered a k&n before and all my lights came on. Bought this one and nothing happened I feel a difference in power. Great item and quick on shipping
starstarstarstarstar
Andy
October 23, 2016
Install was super easy on the G37. Took roughly an hour and was able to do it without having to remove the entire front bumper. My only gripe is that I had to fabricate a bracket in order to hold up the ends of the filters but that was easy enough. There is a marked difference in intake noise with heavy to WOT input which is pleasant and throaty. Under normal conditions you would never know the difference. Throttle response seems to be increased as well with no negative effects. Design was well thought out and visually appealing.
starstarstarstarstar
Tony
August 7, 2016
Hey z1. Awesome intake! This is the easiest mod Ive done.no need to pull bumperon g 37 .fitment is perfect!just a note silicone lube is your friend.
starstarstarstarstar
Tony
August 7, 2016
Hey z1. Awesome intake! This is the easiest mod Ive done.no need to pull bumperon g 37 .fitment is perfect!just a note silicone lube is your friend.
starstarstarstarstar
Kaleb
June 27, 2016
Amazing intake! Super easy install. Took about 1 hour from start to finish and that includes the time to take off the factory back and the bumper. Instructions are very clear and easy to use. As far as performance, I personally feel like the acceleration is smoother now. Also the car seems to run cooler with the longer intake. Also a definite sound difference! All in all, would recommend.
starstarstarstarstar
Matt
March 15, 2016
Great product as always. Bought/Installed these to replace my k&n typhoon. So glad I did, highly recommended. These true cold air intakes are the only way to go, if the filters are under the hood and not infront of radiator it might as well be a hot air intake. I wish it came with brackets to hold up filters