The all-new Z1 Carbon Fiber cold air intake for the Infiniti Q50 Sedan and Q60 Coupe is an easy-to-install performance upgrade that offers a substantial increase in flow over stock providing improved power and response.
One of the best methods of increasing the output of turbocharged engines is by eliminating any restriction for air entering the turbo. Doing so reduces the pressure ratio across the turbo’s compressor and reduces the turbo speed required to produce the requested air flow. This means the turbocharger can do its job more efficiently and deliver cooler/denser air to the engine. The 3.0t (VR30) in your Infiniti is fed by two Garrett turbochargers that ingest air from the car's intake system. Air is drawn through the ducting above the core support, passes through the air filter, and is routed to the inlet of the turbo where it is ingested and turned into BOOST! The factory intake system was designed to be cost-effective and flow just enough air to meet the performance needs of the stock car. The Z1 Intake System was designed to eliminate the restriction of the factory panel filters, improve the air path between the core support and turbo inlet, and in doing so provide a substantial increase in air flow to support higher horsepower applications.
The first step in improving the air path was to replace the stock corrugated rubber intake piping with a smooth multi-ply silicone hose. By providing air with a smoother path to travel, intake turbulence is reduced resulting in improved airflow. The Z1 air intake system features two newly engineered air filters, designed exclusively for the Nissan 3.0t engine. These filters use a high-density media capable of capturing most particulates while providing exceptional airflow. Inside of the filter, a velocity stack has been integrated into the base to optimize airflow and increase air velocity. To contain these large-media filters, we developed a sealed airbox manufactured from carbon fiber! While some manufacturers use a blend of fiberglass and carbon fiber, Z1 3.0t Intakes are manufactured from 100% carbon fiber! The sealed boxes keep hot air out of the engine bay, only allowing cool air ducted from the OEM intake cowl to enter the intake!
Below you can see the dyno chart, delta power gains, and flow bench data comparing Z1 intakes to the stock intakes. Due to the various levels of tune affecting final numbers we have opted to show gains on a stock tune ONLY. This shows the expected performance on the average Q50/Q60. Additional power gains can be expected on cars with larger turbos or higher levels of tune.
Dyno Comparison: Z1 Intakes vs. Stock Intakes // Stock Tune
Delta Gains: Z1 Intakes // Stock Tune
Flow Comparison: Z1 Intakes vs. Stock Driver (LH) Side Intake (stock filter and drop-in filter)
Flow Comparison: Z1 Intakes vs. Stock Passenger (RH) Side Intake (stock filter and drop-in filter)
Features:
- 8.1-9.8% Increase average increase in flow over stock
- 100% carbon fiber airboxes
- Integrated Velocity Stack in air filters
- Utilizes factory MAF housing
- Simple installation
- Long-life air filters
- No tune required
Fits:
- 2016+ Infiniti Q50 Sedan 3.0t
- 2017+ Infiniti Q60 Coupe 3.0t
*** This item does not qualify for any additional discounts or promotions *** |
 |