Z1 Motorsports 370Z/G37 Power Steering Cooler Upgrade Kit for all '09+ Nissan 370Z and '08+ Infiniti G37 models. Give your car the endurance it needs to perform in the most demanding conditions and while helping extend the life of fluid, seals and hard parts.
Located just in front of the Radiator assembly, the Power Steering Cooler helps keep the power steering fluid's temperature under control. Heat is generated when the car is steered and pressure goes up in the system, so in addition to power assist the Power Steering Fluid serves two vital purposes.
- Lubricate the steering components and bearings.
- COOL THE VARIOUS COMPONENTS...including the bearings and seals in the pump and power steering rack.
Your Z or G is equipped with a small tube and fin-style power steering cooler. This cooler works well in light duty street applications however in demanding applications such as forced induction equipped vehicles and those engaging in track events the factory cooler isn't quite large enough to manage the extra heat. When pushed hard the power steering fluid can reach a critical temperature where the fluid will boil. Power steering fluid that has reached its boiling point will lose much of its lubrication and cooling ability, leading to accelerated wear of the power steering pump and rack & pinion. Once the fluid has reached the point of boiling, the fluid must be flushed and changed.
Z1's Power Steering Cooler replaces the small factory cooler with a higher-performing Z1 ProCooler+ oil cooler core, much like the one used in our Engine Oil Cooler Kit. In addition to the increased cooling performance, these cores have proven themselves as the most durable oil coolers available. Whether you're an occasional touge warrior or a dedicated time attack champion, our power steering cooler upgrade is up to the task!
The Z1 370Z/G37 Power Steering Cooler comes complete with the following hardware:
The Z1 Motorsports Power Steering Cooler features a 100% bolt-on installation requiring no modification, drilling or cutting of the vehicle to perform the installation. The Z1 Motorsports Power Steering Cooler's installation kit allows for a low-profile install, allowing for adequate room for intercoolers, etc.
Please note:
By removing the factory power steering cooler, you will need to replace whatever fluid is lost. In addition, the increased volume of the Power Steering Cooler will require additional fluid as well. Z1 Motorsports recommends using of either the Factory Nissan or Redline Power Steering fluid, available separately. You may find power steering fluid for your 370Z/G37 HERE. *** This item does not qualify for any additional discounts or promotions *** |
|
 |