Product Description
Cooler intake air charge equates to more horsepower. Now you can monitor your intake air temperature using the new AEM AIT Air Temperature Sensor.
Includes:
- (1) AEM AIT Temperature Sensor
- (1) 3/8 NPT Aluminum Weld On Bung
- (2) Wire Terminals
- (1) Weatherproof Connector
Sensor Specifications:
- Accuracy: < 1.5°C / 2.7°F
- Operating Temp: -40C to 135C / -40F to 275F
- Resistive Range (Ω): See Table
- Thermal Time Constant: < 15 sec. The time required for the sensor to achieve 63.2% of its steady state value when subjected to a step change in ambient temperature [Tc=(Tf-Ti)*63.2%+Ti]. Test medium: silicone oil
- Sensor Body Material: Brass
- Thread: 3/8" NPT
- Hex Size: 3/4"
- Installation Torque: 20Nm / 15 ft-lbs
- Weight: 33.3g
- Electrical Termination: Weatherproof connector. Includes Mating Connector, Pins & Wire Seals
AEM AIT Sensor Product Data
AEM AIT Sensor Install Instructions
|
Tomei Adjustable Fuel Pressure Regulator - Type S
starstarstarstarstar (1)
$108
Z1 VQ37VHR High-Energy Ignition Coil Pack - Set of 6
starstarstarstarstar (100)
$349.99
Z1 Motorsports 350Z / G35 VQ35DE 75mm Throttle Body Kit
starstarstarstarstar_half (57)
$259.99
Z1 350Z / G35 VQ35DE High-Energy Ignition Coil Pack - Set of 6
starstarstarstarstar (38)
$349.99
Stainless Steel T Bolt Clamps
starstarstarstarstar (4)
$3.48
Denso Front Oxygen (O2) Sensor (350Z / G35) - Upstream
starstarstarstarstar (4)
$76.41
Z1 350Z / G35 VQ35HR High-Energy Ignition Coil Pack - Set of 6
starstarstarstarstar_half (10)
$349.99
ASRIUBNFAIURNFKAJSNFLAKJSDNFLKASNDFLKASDNMFALKSNDFOANEF