TwinZ Design 300ZX Z32 Front Bumper Inserts (Type 1 & 2)

Improve the visual appearance of your TwinZ 300ZX with the NEW front bumper inserts! The new TwinZ inserts provide a much more aggressive look without sacrificing much airflow to the intercoolers. Available in two types; The Type 1 Inserts are a bit smaller leaving room for a universal 30 LED DRL / turn signal to be installed. (Available separate, example HERE.) Type 2 Inserts fit the full side vent as shown below.

Types:

• 1: As seen on most newer supercars, these bumper inserts were designed as an optional accessory to compliment the look of the TwinZ Design P-Spec 1 v2 bumper. This accessory will add nice and aggressive details to the front of your 300ZX, providing a more up-to-date look.
• 2: As seen on most newer supercars, these ducts have been designed as an optional accessory to compliment the look of our TwinZ Design P-Spec 1 v2 bumper. These ducts will give a nice and aggressive detail to the front end of the 300ZX, getting a more up-to-date look.

NOTE:

• You can use the universal 30 LED daytime/turn signal lights (not included with the part).
• This part only fits the VERSION 2 of our P-Spec 1 front bumper. If you are not sure what version you have, please check the measurements on the picture below that will help you identify it. 

Designed to be used on the TwinZ Front Fascia

Type 1 (Click For Larger Image)

Type 2 (Click For Larger Image)

Be sure to check out other TwinZ Design Products HERE.