- Performance Parts
- Fuel System
- Fuel Pumps
Product Description
Here is the DW200 Series Fuel Pump. This fuel pump is an affordable alternative to the DW300 Series Pumps. If you don't need 320lph of fuel flow but need a bit more than stock then look no further. This pump is E85 compatible and comes with DeatschWerks 3 year warranty.
- Flows 255+ litres per hour
- In-tank application specific fitment
- Ethanol E85 compatible
- 3-year no-fault warranty
- Quiet and reliable turbine impeller
- Includes installation kit
Fits:
|
check_circle_outlineAdded to cart
=
Z1 350Z / G35 Fuel Pump Service Kit (Grommet with O-Ring)
starstarstarstarstar (4)
$17.55
OEM 350Z / G35 VQ35DE Spark Plug - One Step Colder - NGK PLFR6A-11
starstarstarstarstar (29)
$12.73
OEM 350Z / G35 VQ35DE Valve Cover & Gasket Kit
starstarstarstarstar (35)
$439.99
350Z Front Radiator Core Support
starstarstarstarstar (12)
$164.84
Deatschwerks VQ Drop In Injectors
starstarstarstarstar (7)
$499
OEM 350Z / G35 Negative Battery Ground Cable
starstarstarstarstar (4)
$106.05
Walbro 255 lph In Tank Fuel Pump
starstarstarstarstar_half (18)
$114.15
AEM 340 LPH E85 Fuel Pump
starstarstarstarstar_half (10)
$129.95
DeatschWerks Fuel Pump Hardwire Upgrade Kit
$49
Walbro HELLCAT 525 lph In Tank Fuel Pump E85
$154.86
AMS Q50/Q60 VR30 Red Alpha Low Pressure Fuel Pump Upgrade
starstarstarstarstar_half (4)
$237.60
Z1 Q50 / Q60 3.0t Low Pressure Fuel Pump Upgrade
$229.99
starstarstarstarstar_border
Travis
July 15, 2022
Project car, hasn't been run yet. Comments regarding fitment... Not in the description is the fact it is longer in length than the OE pump, and you cannot re-install the original bottom clip to secure the pump, nor can you use the provided strainer sock. Must use the OE, which is spring-loaded. The tension of the pump outlet and grommet along with the spring-loaded strainer is all that gives confidence it'll work reliably without coming loose. And there is not an eighth of an inch to spare between the bottom of the strainer and floor of the enclosure. You'll have about an 8th of an inch to close the top-hat bulkhead.
ASRIUBNFAIURNFKAJSNFLAKJSDNFLKASNDFLKASDNMFALKSNDFOANEF