Spirited weekend track drives do not have to sacrifice daily driving comfort or performance. Designed for the performance enthusiast in mind, the RS-R Sports-I coilover system provides a comfortable ride for everyday use, yet is sufficient enough for those effervescent track days.
Why spend all day at the track dialing in your suspension when you should be on the track enjoying the experience. Damper and camber adjustments should not be a definitive factor, nor should you spend all day adjusting your suspension settings at the track. Drive to the track, on the track and drive home in comfort. Enjoy driving again with the RS-R Sports-I coilovers.
The RS-R Sports-I coilovers are all Monotube hand assembled systems specifically designed to improve ride quality, performance, and comfort. Utilizing components such as; laser cut upper mounts, hand welded lower brackets, vehicle specific valving, are all assembled by hand to ensure quality and detail.
Utilizing Urethane bushing instead of bearing to reduce excessive vibrations from every day driving, as well as minimizing noises from suspension movements. On MacPherson type suspension, as the suspension rotates along with the steering wheel, the coil springs may be prone to twisting. RS-R suspension utilizes roller bearings to eliminate spring twist noise. Rubber padding is utilized to help eliminate potential noise from suspension movements. Damper adjustment dials are up to 36 way adjustable to tune the shocks compression and rebound to each individuals needs for almost any driving condition. Damper adjustment dials are up to 36 way adjustable to tune the shocks compression and rebound to each individuals needs for almost any driving condition.
Non-Sport Specs
|
| |
Front |
Rear |
| Spring Rate |
10.00kg/mm |
5.00kg/mm |
| Preset Approximate Height |
-40mm (-1.6in) |
-35mm (-1.4in) |
| Maximum Adjustment Range |
-15mm to 95mm (-0.6in to -3.7in) |
-10mm to -110mm (-0.4in to -4.3in) |
| Recommended Adjustment Range |
-20mm to -65mm (-0.8in to -2.6in) |
-20mm to -60mm (-0.8in to -2.4in) |
| Sport / Red Sport Specs |
| |
Front |
Rear |
| Spring Rate |
10.0kg/mm |
5.0kg/mm |
| Preset Approximate Height |
-35mm to -40mm (-1.4in to -1.6in) |
-30mm to -35mm (-1.2in to -1.4in) |
| Maximum Adjustment Range |
+10mm to -85mm (+0.4in to -3.4in) |
0mm to -100mm (0in to -4.0in) |
| Recommended Adjustment Range |
-10mm to -65mm (-0.4in to -2.6in) |
-10mm to -65mm (-0.4in to -2.6in) |
Fits:
- 2014+ Infiniti Q50 Sedan (V37)
 |