The TwinZ Design Type 1, Type 2, & Type 3 Rear Wings are now available! This rear wing has been designed to give a more updated and aggressive look to the rear of your 300ZX.
Brake Light:
These Rear Wings come with a FREE LED third brake light (a 15.5" 60 LED brake light in red as a gift - no warranty on this accessory).
- Third Brake Light Lens only available in RED, not clear as shown in the pics
- This lens mounts with screws on the Type 1 Wings
- The Type 2 and Type 3 wings require the mounting points to be shaved off of the LED so it can then be secured with double sided body tape
Installation:
- The Installation guide can be found HERE.
- Please be aware if you plan to remove your third brake light to install this spoiler you will need to plug the holes left in the hatch to keep the cabin air tight.
View this part featured on our TwinZ Demo car, on video HERE.
These items are a raw FRP material and will require full prep and paint work before installation
Fits:
- ALL 300ZX (Z32) models (2 seater and 4 seater)
NOTE: When installing this wing (any Type), you'll need to remove the 3rd brake light panel or previous wing. Make sure to cover with a tape or a patch all the holes on the hatch where the 3rd bake light panel used to be placed. This way you will avoid the fumes from the exhaust getting into the cabin.
Type 1, 2, 3 Comparison
Type 1
Type 2
Type 3
Be sure to check out other TwinZ Design Products HERE.
|
 |