This part has been discontinued by ZSpeed and is no longer available.
If you have ever had your stock shifter support plate break the center mount, it is a scary feeling and makes it almost impossible to drive the car. With the Z Speed Solid Shifter Support Brace this will never happen again!
The Z Speed Performance Solid Shifter Support Brace is made from 3/8" Laser Cut High Strength Steel and replaces all of the current shifter mounts along with the included shift boot kit. That means you are removing over $250 worth of Nissan parts that need replacing periodically with items that will withstand decades of abuse. Coupling this brace and boot kit with the Z1 Premium Short Throw Shifter produces the most accurate and solid shift feel imaginable.
The Z Speed SOLID Shifter Support Brace works with Stock Type and Z1 Premium Short Throw Shifters.
Depending on your transmission mount style and age you may notice an increase in movement of the shifter over bumps as it is attached directly to the transmission instead of the tunnel. Z1 recommends replacing the transmission mount when adding the Z Speed Solid Shifter Support Brace to eliminate this movement.
We are pleased to now include the upgraded boot kit for use with the Z Speed Solid Shifter Support Brace at no extra cost. This boot kit greatly eases installation and eliminates all of the Nissan boots and hardware.
Features:
- Adjustable so you can move shifter slightly left or right, and forward or back to your preference.
- Will never break allowing your shifter to fall down and grind on driveshaft.
- Every mount kit comes with all related mounting hardware and grease to re-grease your shifter socket and bushings!
Install Instructions in PDF can be found HERE.
Disclaimer - By purchasing this product you are assuming all liabilities associated with its installation and use.
Please select the appropriate options below including the opportunity add a Z1 Premium Short Throw Shifter at an incredible discount.
 |