Product Description
(1) Silicone replacement left side PCV hose.
Located on LH side of the engine, this hose connects to the metal elbow in the rear of the far LH "exhaust" valve cover, and delivers any excess crankcase pressure directly to the PCV valve mounted under the LH side of the intake plenum. Includes a pre-installed metal restrictor just like the OEM hose.
4 ply reinforced high quality silicone hose, custom formed for perfect fitment on the Z32.
This is the last left side PCV hose you will ever need. Unlike conventional stock rubber hoses that deteriorate over time, dry rot, and ultimately crack this silicone hose will stay soft and never degrade. Best of all it costs less than a new OEM rubber hose.
Z1 Motorsports offers a full line of silicone hoses for the Z32 that will be the last hoses you will ever have to purchase. They will outlast the car at less cost than OEM replacements! There's no reason to consider anything else.
Fits:
- 1990-1996 Nissan 300ZX (Z32)
Color:
Please select the desired color from the options below.
|
check_circle_outlineAdded to cart
Please select and verify all product options for this bundle.
=
Z1 Silicone 300ZX (Z32) PCV Hose - Right
starstarstarstarstar_half (3)
$16
Z1 Silicone 300ZX (Z32) PCV Hose - Rear
starstarstarstarstar (4)
$7
300ZX (Z32) Balance Tube O-Ring Set
starstarstarstarstar (34)
$9.98
300ZX (Z32) Fuel Line Kit - 8 Hoses
starstarstarstarstar_half (29)
$39.99
300ZX (Z32) EGR Plates & Gaskets
starstarstarstarstar (1)
$24
OEM 300ZX (Z32) Plenum Gasket
starstarstarstarstar_half (8)
$9.31
Z1 350Z / G35 VQ35DE Silicone PCV Hose Kit
starstarstarstarstar (62)
$49.99
Z1 370Z/G37 Silicone Side PCV Breather Hose set for Aftermarket Intake
starstarstarstarstar_half (71)
$34
300ZX (Z32) Balance Tube O-Ring Set
starstarstarstarstar (34)
$9.98
Stainless Steel T Bolt Clamps
starstarstarstarstar (4)
$3.48
Z1 370Z / G37 Silicone Heater Hose Set
starstarstarstarstar_half (36)
$42
Z1 Silicone Post-MAF Intake Hoses
starstarstarstarstar_half (73)
$119.99
starstarstarstarstar
Jason
January 25, 2021
Take off your hardened PCV hose. Cut it off. Use a big screwdriver. Whatever you need to do. Throw it away, and install this. If you're as crazy about maintenance as I am, you'll be thanking yourself for years to come! You won't need to buy another one of these!
starstarstarstarstar
Brady
October 29, 2014
These hoses are amazing!! Not only are they a perfect fit but they are silicone so never have to replace them!! I got the red color ones and they look fantastic!
I would highly recommend these as well as valve cover gaskets and new PCV Valves when doing a first time plenum pull.
ASRIUBNFAIURNFKAJSNFLAKJSDNFLKASNDFLKASDNMFALKSNDFOANEF