Product Description
Z1 Motorsports 350Z/G35 Lightweight Aluminum Crank Pulley KIT for all VQ35DE equipped models.
Kit includes:
Machined from 6061 Aluminum, the Z1 Motorsports 350Z/G35 Lightweight Crank Pulley is a great, economical weight to free up some extra horsepower from you VQ35DE power plant. Designed to take the abuse of the track and the street, the Z1 Motorsports Lightweight Crank Pulley address many of the issues that plague other crank pulley's on the market.
Such items that have been specifically targeted and corrected over other....similar....aluminum crank pulley's on the market:
- Designed to meet SAE specifications regarding the overall machining of the Belt Grooves.
- Weight Reduction: 2.00 lbs vs. 6.25 lbs stock.
- Designed NOT to crack or fail - Many Aftermarket Aluminum VQ pulleys crack or can fail around the pulley face as a direct result of the extreme measures manufacturers take to save weight.
- Large, easy to read machined Timing Marks
- Increased belt shoulder height - To help prevent belts from jumping or misalignment.
- 0% Underdriven to prevent any issues with the factory Air Conditioning, Alternator or Power Steering.
- Retains the usage of OEM Belts - No need to worry about trying to remember or find out what special belt you need for you car!
- Available in either a Machined Silver or Black Anodized Finishes - Your choice at no extra charge!
- Reasonably priced - When compared to other Lightweight Aluminum Crank Pulley's on the market and/or an OEM Factory replacement pulley.
- Increased Throttle response - A direct result of removing excess rotational weight from the crankshaft/driveline.
Belt Route with Idler Pulley
Belt Route after Pulley Delete
Please be sure to select the appropriate finish below.
*** This item does not qualify for any additional discounts or promotions *** |
 |
check_circle_outlineAdded to cart
Please select and verify all product options for this bundle.
=
OEM Crank Pulley Bolt
starstarstarstarstar (9)
$9.10
AMS Lightweight Alt. Pulley (VQ35DE)
starstarstarstarstar (1)
$36.23
OEM VQ / VR Front Crank Seal
starstarstarstarstar (12)
$10.24
Z1 Motorsports 350Z / G35 VQ35DE 75mm Throttle Body Kit
starstarstarstarstar_half (65)
$259.99
Z1 350Z / G35 VQ35DE High-Energy Ignition Coil Pack - Set of 6
starstarstarstarstar (43)
$349.99
Z1 Stainless Steel Magnetic Oil Drain Plug
starstarstarstarstar (37)
$19.99
Z1 Stainless Steel Magnetic Oil Drain Plug
starstarstarstarstar (37)
$19.99
Z1 370Z / G37 / Q50 VQ37 Serpentine Belt
starstarstarstarstar (21)
$29.99
Z1 350Z / G35 DE A/C Compressor Belt
starstarstarstarstar_half (6)
$14.99
Z1 Q50 / Q60 3.0t VR30 Serpentine Belt
starstarstarstarstar (7)
$29.99
Z1 350Z / G35 DE Alternator Belt
starstarstarstarstar (6)
$29.99
Z1 350Z / G35 HR Serpentine Belt
starstarstarstarstar (4)
$29.99
starstarstarstarstar
Steven
January 12, 2025
So happy with my purchase, arrived home from work and opening the box like a kid at Christmas taking the items out of the packaging, parts are top quality finish giving me peace of mind for reliability and at a great price and delivery service was first class from the USA to UK in just a couple of days, I couldn't get this service across UK, keep up the good work, thank you
starstarstarstarstar
Yessenia
July 26, 2024
I got my 350z 100% stock and I’ve done tons of mods too it and I mean a lot of them and I easily say this light weight crank pulley makes a big difference it’s like putting the cold air intake paired with the kinetix v+ plenum and a catback exhaust and you’ll still feel more from this single part I’ve notice that light weight flywheels and these light weight pulleys always make a big difference definitely and it’s runs better with A/C get ready to re learn how to shift same effect as adding a lighter flywheel
starstarstarstarstar
Darius
January 8, 2024
Just read it’s easy that way but that pully way lighter than the oem jawn
starstarstarstarstar
Nedhal
December 11, 2023
Excellent performance and its better than the OEM pulley, the OEM noise is gone.
I recommend it.
starstarstarstarstar
Michael
August 13, 2023
Quicker revs and less resistance that’s immediately noticeable
starstarstarstarstar
Jesse
July 4, 2023
Lightweight and looks great
starstarstarstarstar
Hayden
May 11, 2023
Revs a little more freely, install was a pita due to the crank bolt but i just used the end of a jack handle and there ya go.
starstarstarstarstar
Joshua
April 29, 2023
These work great. Used them on my last engine and put them on my new one. Very good quality
starstarstarstarstar
Chris
April 11, 2023
Great shipping, belts perfect size.
starstarstarstarstar
Roman
February 26, 2023
Works as expected.
Perfect fit.
starstarstarstarstar
Anthony
November 1, 2022
Works perfect, only hard part is getting the crank off. I just cut and wrapped my old belt around the crank/ other pulleys and used a breaker bar. No issues after
starstarstarstarstar
Andrew
October 5, 2022
I actually purchased and had this kit installed awhile back, but forgot to write a review.
Honestly, I didn't notice much difference under normal driving without using the HVAC but... Once I turned the AC on... That's when the lightweight pulley truly showed it's worth. Throttle response is much snappier now, and the strain from running the AC isn't as noticable. That was a big complaint for me, thankfully not so much now. I had to replace my alternator and decided doing new belts would be smart, then came across this kit. Very glad I did!
starstarstarstarstar
Jeffrey
September 7, 2022
Easy to install and straight forward. Did notice a small gain in hp/tq. No vibration issues.
starstarstarstarstar
Trevor
July 11, 2022
You can really feel the difference with this kit
starstarstarstarstar
Chris
June 3, 2022
starstarstarstarstar
Gabriel
December 19, 2021
Would definitely recommend.
starstarstarstarstar
Christopher
August 1, 2021
Butt dyno felt a difference, took a bit to install nothing crazy though. ended up using a long breaker bar and rested it on a solid metal on the right toward the intake, pulled the fuel pump fuse and gave it a very quick crank just bumping it and it worked like a charm, I tried every other method with a breaker bar from straps to in gear (manual) with the brakes held. unless you want to drain and pull the radiator and front off to use an impact. do it at your own risk if your breaker bar isn't in a good spot you could break an ac line or worse
starstarstarstarstar
Jayson
June 13, 2021
Big difference... love it
starstarstarstarstar
Gerrett
May 12, 2021
Quality machining. What’s else can you ask for?
starstarstarstarstar_border
Shamarr
April 11, 2021
This is a great kit which was easy to install, aside from getting the crank pulley nut a loose everything else was a breeze. The throttle response feels a bit snappier and when I use my A/C it doesn't feel like as much of a load on the engine as it was once before.
starstarstarstarstar
James
March 10, 2021
Great quality and fitment. The black finish looks oem and belts and spacer fit perfectly. Thanks Z1!
ASRIUBNFAIURNFKAJSNFLAKJSDNFLKASNDFLKASDNMFALKSNDFOANEF