
The Z1 370Z R-Pro Coilovers by Feal Suspension are the ultimate suspension upgrade for your Nissan 370Z. With fully adjustable damping and ride height, these coilovers give you complete control over the handling and performance of your vehicle. The Z1 R-Pro is custom valved and sprung based on Z1’s VR30 Time Attack race car, targeted to perform best with 200 treadwear r-compound tires.
R-Pro coilovers feature 30-way adjustable compression/rebound for fine-tuning stiffness and damper performance. Each adjustment click provides a precise and incremental increase or decrease in damping force, allowing you to make predictable changes to the ride characteristics of your Z. Spring pre-load is independently adjustable providing further adjustment for a multitude of driving situations. Ride height can be adjusted, allowing you to set ride height based on your car's setup and personal preference. Ride height adjustment is attained by adjusting the position of the shock in the lower mounting sleeve, assuring ride quality and damper performance are the same at any ride height. Articulating pillowball upper mounts are utilized on the front and rear, providing a direct suspension feel without binding.
Comfort Flow Valve
At the end of the adjustment range, Feal has engineered a technology called the Comfort Flow Valve. This function is active within the last 5-clicks in the softest position of the damper and uses uniquely designed bypass routes inside the shock. These final 5-clicks in the adjustment range are intended to drop damping force significantly and allow the shock to hit a low damping ratio, mimicking a luxury car ride. The Comfort Flow Valve is also well utilized in motorsports to help speed up weight transfer in environments when tire grip can be challenging, such as wet tracks.
Spring Rates:
Features:
- Standard with Swift springs!
- 30-Way adjustable compression/rebound damping
- Independently adjustable spring preload
- Adjust ride height without affecting damper performance
- True-style rear coilover assembly- Compatible with Z1 Adjustable Toe Arms!
- Articulating pillowball upper mounts with teflon-injected spherical bearings
- High-quality low friction seals and rod guide bushings
- High flow pistons (allows super high range of damping tuning)
Fits:
While these coilovers were designed specifically for the vehicles mentioned above, these coilovers also fit the following cars:
- 2009-2013 Infiniti G37 Coupe
- Except AWD and Convertible Models
- 2014-2015 Infiniti Q60 Coupe
- Except AWD and Convertible Models
- 2008-2013 Infiniti G37 Sedan
- 2007-2008 Infiniti G35 Sedan
- 2023+ Nissan Z
 |