Mishimoto 2016+ Infinity Q50 / 60 Performance Air-To-Water Intercoolers for models equipped with the 3.0T.

Infiniti is known for uncompromised luxury, comfort, and style; but enthusiasts love them for their overbuilt engines that can produce huge power without skipping a beat. The 2016+ Infiniti Q50 follows this same formula with a luxurious interior, stylish exterior, and the VR30DDTT twin-turbocharged 3.0L engine that it shares with its legendary cousin, the Skyline. From the factory, the VR30 produces up to 400 horsepower and 350 lb-ft of torque, but with upgraded turbos and fueling, Q50s and Q60s are easily hitting 1,000 horsepower.

THESE INTERCOOLERS DO NOT WORK WITH AFTERMARKET BLOW OFF VALVE KITS.

That much power requires massive amounts of air to be crammed into the engine. The stock intercoolers are well suited for stock engines, but they weren't designed for four-digit power levels. That's why Mishimoto has developed performance air-to-water intercoolers for the 2016+ Q50/Q60 3.0T. Their intercoolers feature a 49.8% increase in core volume over the stock intercoolers for improved heat transfer and maximum performance. That increase in core volume, combined with optimized tubes and fins, also allows the intercoolers to be over 51% less restrictive than stock. That means your turbos don't have to work as hard, and the boost pressure they generate isn't wasted shoving air through a restrictive intercooler.

All those improvements result in dyno-proven charge air temperatures that are up to 23°F cooler than stock. Colder intake charge temps mean your VR30 can make the most of every drop of fuel, and we were able to produce power gains of up to 8 HP and 12 lb.-ft of torque without a retune.

Mishimoto also knows that high boost pressures require strong components, which is why they constructed intercoolers with cast aluminum end tanks. This design eliminates potential leak points and stress concentrations that welded tanks may suffer from. The included ancillary hoses and couplers ensure coolant and air flow reliably through the intercoolers, and the included engine cover spacers let you keep your extra cooling hidden for a stealth approach. Like all Mishimoto products, these performance intercoolers for the 2016+ Q50/Q60 3.0T are backed by Mishimoto's Lifetime Warranty.

Information:

• High-strength braided design for use in locations where abrasion resistance is vital.
• 304 stainless-steel version resists corrosion
• Available nylon outer braid will not abrade soft materials such as plastic or aluminum
• Both nylon and stainless-steel versions feature a woven stainless-steel inner jacket for increased pressure resistance
• Fits with -8AN fittings (sold separately)
• Chemical resistant CPE rubber core is compatible with petroleum-based fuel, diesel, oil, and coolant
• Provides refined engine bay aesthetics and improved durability over rubber lines
• Operating temperature range from -40°F to 30°F Maximum pressure rating of up to 1,000 PSI*
• Mishimoto Lifetime Warranty

Specifications:

• Maximum Recommended Horsepower: 900
• Core Type: Bar-and-Plate
• Core Length (in.): 4.64
• Core Height (in.): 3.98
• Inlet (in.): 1.97
• Outlet (in.): 2.56
• Overall Height (in.): 5.68
• Overall Length (in.): 11.65
• Overall Width (in.): 9.23
• Part Number: MMINT-Q50-16

**Installation Instructions**

Fits:

• 2016+ Infiniti Q50 (VR30DDTT)
• 2017+ Infiniti Q60 (VR30DDTT)