Product Description
This is the Knock Sensor Sub Harness found on all Nissan 350Z and Infiniti G35 models equipped with the VQ35DE Engine. When this harness fails you will see a Check Engine Light with the code P0327.
P0327 Codes are caused by either a low output voltage seen by the ECU from the knock sensor pointing to a faulty sensor or a short or open knock sensor circuit.
While most often this code is indicative of a faulty knock sensor sub harness, sometimes the sensors do go bad you can elect to purchase both below and save.
Z1 also sells new OEM Knock Sensors HERE and can be included for a discounted price as an option below.
NOTE: G35 models with a build production date before 06/03 MUST purchase a new style knock sensor with the harness. The original knock sensor on G35's built prior to 06/03 is different, and cannot be connected with this new style harness. The optional knock sensor below is a new-style type sensor and will allow you to use the newer style knock sensor sub harness sold here.
Fits:
- 2003-2006 Nissan 350Z
- 2003-2007 Infiniti G35 Coupe
- 2003-2006 Infiniti G35 Sedan
- 2003-2008 Infiniti FX35
This is intended for the above listed models ONLY. Fitment on FWD VQ's (Maxima, Altima, etc.) has not been confirmed.
*** This item does not qualify for any additional discounts or promotions *** |
|
check_circle_outlineAdded to cart
Please select and verify all product options for this bundle.
=
OEM VQ35DE Lower to Middle Plenum Gasket
starstarstarstarstar (19)
$22.86
OEM VQ35DE Upper Plenum Gasket
starstarstarstarstar (19)
$33.84
Z1 350Z / G35 VQ35DE Plenum Spacer
starstarstarstarstar_half (149)
$189.99
OEM VQ Lower Intake Plenum to Cylinder Head Gasket
starstarstarstarstar_half (13)
$8.02
VQ35DE Valve Cover Gasket
starstarstarstarstar (18)
$13.65
350Z / G35 VQ35DE Crankshaft Position Sensor
starstarstarstarstar_half (17)
$59.99
Z1 VQ37VHR High-Energy Ignition Coil Pack - Set of 6
starstarstarstarstar (108)
$349.99
Z1 350Z / G35 VQ35DE High-Energy Ignition Coil Pack - Set of 6
starstarstarstarstar (43)
$349.99
Z1 Motorsports 350Z / G35 VQ35DE 75mm Throttle Body Kit
starstarstarstarstar_half (65)
$259.99
Z1 300ZX Ignition Coil Pack Repair Harness
starstarstarstarstar_half (9)
$6.98
Z1 350Z / G35 VQ35HR High-Energy Ignition Coil Pack - Set of 6
starstarstarstarstar_half (10)
$349.99
Z1 Q50 / Q60 3.0t High-Energy Ignition Coil Pack - Set of 6
starstarstarstarstar (6)
$399.99
starstarstarstarstar
Nelson
December 25, 2024
This piece of wire fixed all my troubles. It’s been almost 10 years and looks like I installed it yesterday.
starstarstarstarstar
Eduardo
December 2, 2024
It’s a pain in butt to get to this sensor but if u getting ur spacer for manifold bay I recommend
starstarstarstarstar
Josue
September 6, 2024
Works great fix the problem
starstarstarstarstar
Michael
March 7, 2024
Fast shipping and the installation only takes about two hours
starstarstarstarstar
Jason
December 11, 2023
Fixed my issue, and my g35 is still going strong 6 months later
starstarstarstarstar
Voix
December 10, 2023
Came as seen, fast shipping.
starstarstarstarstar
Ryan
October 22, 2023
Good product, along with the knock sensor fixed my P0327 code.
starstarstarstarstar
Leonard
September 11, 2023
Great item. Great price for oem part. Fast shipping
starstarstarstarstar
Ned
April 30, 2023
Came quickly and works great.
starstarstarstarstar
Francisco
April 10, 2023
starstarstarstarstar
Anthony
April 2, 2023
I don’t know how Z1 does it but got to my house faster then estimated and got my car running
starstarstarstarstar
Nicholas
March 8, 2023
The harness Solved all my codes related to the knock sensor. This was not hard to install, took some time fishing it thru the tunnel. I kept getting caught on the wire harness, once I got the connector thru it was a breeze! Now time to move to the O2 sensor!
starstarstarstarstar
Nicholas
February 14, 2023
Changed this and have not had an issue.
starstarstarstarstar
Zachary
January 5, 2023
Worked perfect, my Z is back to beast mode
starstarstarstarstar
Bester
August 4, 2022
I had a low voltage code, the new wire cleared it up!
starstarstarstarstar
Wynn
March 30, 2022
The harness was a quality Nissan part and direct replacement. Shipping was fast.
starstarstarstarstar
Tomas
February 28, 2022
Very good quality easy to install once you know how to already.
starstarstarstarstar
Sean
January 16, 2022
Fast shipping, good international service
Would use again
starstarstarstarstar
Jose
October 18, 2021
It took 3 days to get to me better quality then the one it had installed it and it took my check engine light off finally after 7 months of trying to fix my cars thanks
starstarstarstarstar
Lius
August 17, 2021
starstarstarstarstar_border
Scott
July 15, 2021
starstarstarstarstar
Rafael
June 28, 2021
starstarstarstarstar
Jose
June 16, 2021
Exact fit for VQ35DE 06 Infiniti M35 RWD.
starstarstarstarstar
Michael
June 10, 2021
Fit up to the knock sensor and adjacent wiring with no problem. Quality looks and feels better than the oem I had to replace. Even has a protective sleeve over the wiring which is what's missing on the oem. Definitely worth it.
starstarstarstarstar
Hunter
May 16, 2021
I took the whole intake off and installed a new knock sensor with this harness. The code went away. If you have a knock sensor circuit code, I'd recommend this product. Everyone else is selling this harness with the injector harness, so it can be expensive, so save your money and buy this sub harness.
starstarstarstarstar
Joe
May 11, 2021
Thanks works great simple install
starstarstarstarstar
Tony
May 2, 2021
Top quality product. Solved the check engine light code P0327 and car passed smog. I recommend to add heat shield to give this wire extensive life time. Thank you
starstarstarstarstar
Gerald
April 2, 2021
Looks like a charm! Had it in my car since I purchased it in 2019.
starstarstarstarstar
Nicholas
March 19, 2021
Works amazing and excellent quality little harness
starstarstarstarstar
James
March 10, 2021
Awesome. Fixed my issue! Restored the power back into my old de!
starstarstarstarstar
Robert
March 9, 2021
Not too much you can say other than, works great! I Appreciate the fact that Z1 upgraded the line on this so that the heat doesn't get to the wiring, yet again, like it did initially to cause it to short out in the 1st place. Thanks Z1!
starstarstarstarstar
Taz
January 25, 2021
Fixed my issue. No more engine code. I was able to install it without disassembling the engine which was very convenient.
starstarstarstarstar
Daniel
January 25, 2021
Works great fixed my issue I was having for the knock sensor.
starstarstarstarstar
Thomas
May 13, 2020
Super happy with this item. It was cheaper than some other parts resources near me. Parts and shipping was half of what other parts places wanted to sell it to me over the counter. Plugged in perfectly w/ no issues. Took care of my p0327 code that was caused by a rodent chewing the wiring.
starstarstarstarstar
Danny
May 1, 2019
Worked on my 2004 G35. Ordered Monday night in Texas and received on Tues. Shipping was unbelievably fast. A pain to get to to install.
Will definitely use Z1 Motorsports again and highly recommend them.
starstarstarstarstar
Chad
February 12, 2018
VERY happy with this item, ordered late Friday night and had it Monday afternoon!
starstarstarstarstar
Nevin
June 15, 2017
Have not installed the sub harness yet but am very impressed by Z1's speed of service/shipping. I live in Canada and ordered the item at 5pm on Wednesday, I expected it to show up the next week but to my surprise it arrived at 11AM the next day. You guys rock!
starstarstarstarstar
John
March 8, 2017
This fixed my P0327 fault code. The factory sub harness in these cars is very poor quality. Every time it was humid or raining I would get P0327 fault, and the car ran poorly.
starstarstarstarstar
Carey
November 19, 2016
The connector had one tab that didn't match. So I took a sharp knife and shaved off the offending tab. It was an easy fix. Then I assembled the cables and etc. My 2003 G35 has been running great since. No more error code. Thought someone might find this useful.
starstarstarstarstar
Christopher
March 10, 2015
This knock sensor sub harness is a must if you are getting a low knock sensor input signal code. Install is tedious and takes about 2 hours. If you have a loss of engine power and have the previous mentioned cel code, this is your fix. Thanks Z1!
ASRIUBNFAIURNFKAJSNFLAKJSDNFLKASNDFLKASDNMFALKSNDFOANEF