300ZX Boost Jets, Performance OEM and Aftermarket Engineered Parts Global Leader In 300ZX 350Z 370Z G35 G37 Q50 Q60 - Z1 Motorsports
place
expand_more
close
check_circle_outline Added to Cart
300ZX Boost Jets
shopping_cartCart
payment

Checkout

Discover More Products

OEM 300ZX Twin Turbo (TT) Spark Plugs - Set of 6 (NGK PFR6B-11B)
OEM 300ZX Twin Turbo (TT) Spark Plugs - Set of 6 (NGK PFR6B-11B)
$66
Z1 300ZX Z32 Eprom Chip Upgrade
Z1 300ZX Z32 Eprom Chip Upgrade
$100
Z1 300ZX (Z32) High Flow Intake
Z1 300ZX (Z32) High Flow Intake
$88
300ZX (Z32) Balance Tube O-Ring Set
300ZX (Z32) Balance Tube O-Ring Set
$9.98
300ZX Single A-Pillar Gauge Pod
300ZX Single A-Pillar Gauge Pod
$29.90
OEM 300ZX (Z32) Neutral Safety Switch (Manual Transmission)
OEM 300ZX (Z32) Neutral Safety Switch (Manual Transmission)
$19.90
close

300ZX Boost Jets

Fits models: 300ZX

Product Description

(2) Boost Jets with .038 inch orifice. 

These boost jets or orifices are installed inside each of the rubber lines going to the two wastegate actuators on a 300zx Twin Turbo.  Restricting these lines, that have pressurized air running through them while the car is under boost, decreases the pressure acting on the wastegate actuator which in turn raises the boost level that the turbos produce.  These boost jets are not to be installed with-out the proper ECU upgrade and/or tuning.  The maps in the ECU must be adjusted to accommodate for the higher boost levels without the chance of detonation which can result in extensive engine damage.   Installing boost jets also requires installing an external boost gauge to be carefully monitored capable of measuring boost accurately and over 15 psi.  

A stock 300ZX Twin Turbo produces only about 10 psi of boost pressure.  The orifices in the boost jets sold with the popular JWT ECU upgrade are around .040" resulting in about 12-13 psi of boost.  The boost jets presented in this listing are a bit more aggressive with a smaller orifice, however they are "adjustable" by simply filing out the holes with torch tip cleaners the boost can be dropped down to a level is safe for the particular application.   Installing these boost jets with the existing .038 orifice raises the boost on most cars tested to 15 psi.   15 psi is the max amount of boost we recommend running on a 300zx Twin Turbo with stock turbos, stock 370cc injectors, and 93+ octane fuel (RM/2) with the proper ECU mappings and attention.

Many cars behave differently and installing the same boost jets can result in different boost levels for each car.   Prior to installing boost jets and an ECU upgrade cars must be checked to insure basics are in order such as timing set properly to 15 degrees BTDC and that the correct spark plugs are installed.  After installing boost jets it must be verified that boost levels are safe for your particular application.  If you are not familiar with the symptoms of detonation and do not have access to monitoring air fuel ratios with a wide-band oxygen sensor we do not recommend installing these boost jets.  Safe boost level will vary depending on may factors including fuel quality, fuel supply, altitude, existing power-plant modifications, and many more.  Install boost jets at your own risk.  Any damage done to the power-plant as a result of excessive boost is the sole responsibility of the customer.  These boost jets are produced to provide boost  levels on the higher side of what is safe for most Z32s with stock fuel injectors.  They are produced this way because the orifice can be made larger to decrease the boost but you obviously can't make the orifice smaller and increase the boost should that be desired.  These boost jets are intended to be adjusted to the proper safe boost level for each particular application.   Install and use at your own risk!

 

Quantity:

Price: $18.00
add_shopping_cart Add to Cart
commentLeave a Review question_answerAsk A Question About This Product

Customers who bought this item also purchased ...

OEM 300ZX Twin Turbo (TT) Spark Plugs - Set of 6 (NGK PFR6B-11B)
OEM 300ZX Twin Turbo (TT) Spark Plugs - Set of 6 (NGK PFR6B-11B)
$66
Z1 300ZX Z32 Eprom Chip Upgrade
Z1 300ZX Z32 Eprom Chip Upgrade
$100
Z1 300ZX (Z32) High Flow Intake
Z1 300ZX (Z32) High Flow Intake
$88
300ZX (Z32) Balance Tube O-Ring Set
300ZX (Z32) Balance Tube O-Ring Set
$9.98
300ZX Single A-Pillar Gauge Pod
300ZX Single A-Pillar Gauge Pod
$29.90
OEM 300ZX (Z32) Neutral Safety Switch (Manual Transmission)
OEM 300ZX (Z32) Neutral Safety Switch (Manual Transmission)
$19.90

Questions our customers have asked

When installing these do you have to remove the factory jets as well because I been reading and it says they exist I'm not sure though.
These are made to work in addition to the factory jets. You just install near the top of the line and go.

Similar to this item

UpRev ARC License
UpRev ARC License
$100
UpRev Standard Engine Management
UpRev Standard Engine Management
$550
UpRev Engine Management Mail In Flash Service
UpRev Engine Management Mail In Flash Service
$300
UpRev Data Cable
UpRev Data Cable
$225
300ZX (Z32) ECU Upgrades
300ZX (Z32) ECU Upgrades
$249
UpRev Tuner Engine Management
UpRev Tuner Engine Management
$775

COOKIE NOTICE

We here at Z1 take our customers privacy seriously.
We use various analytics and methods to gather information about our visitors and how they use our services. One of these methods involves understanding our visitors through accurately measuring our customers. To do this, upon signing in to your Z1 account, we ask that you allow us to send your numerical customer ID to third parties. This helps us identify when you use our site across multiple devices (mobile phone, tablet, computer etc.). See our Privacy Policy for more information.
Do you allow us to track your use of our site accross devices by sharing your customer ID?
thumb_up Yes, share my customer ID.
thumb_down No, don't share my customer ID.